Hardware

Hi, my laptop got fried because of getting caught in the rain :(

I got a gaming laptop for work a few years ago, because appearantly the CPU AMD Ryzen 9 6900HX was about the best thing to be found for updating some ridiculously complicated excel power query circusses at work, according to the internet back then (i think I found that info on pc master race on reddit before the reddit-api-fall), and finding those CPU's in business laptops was rather difficult at the time. They were right, this CPU handled the queries like a walk in the park.

Is the AMD Ryzen 9 6900H* still a very good CPU for this kind of thing, or should I put in a lot more time investigating again, is there better cost-efficiency available now in other CPU?

Sorry if this is not a right place for this question. I'm usually not really a hardware guy. Just need a CPU that handles this Excel shit as fast as possible, preferably without locking up the entire machine and without being as noisy as an F16 getting ready for lift off. On "regular" work laptops with i5 or i7, these files can take literally over an hour to update.

https://www.youtube.com/watch?v=vb8AB8bsQSk

My understanding between TB4 and TB3 is that they're essentially the same, it's just that the standard of TB4 essentially mandates that the device must do all that TB3 maybe could do. Minimum bandwidth is increased and I think I read something about power delivery minimums as well. This eGPU chassis I bought came with it's own TB4 cable, which is actually the first Thunderbolt cable I've seen that specifically says "4" on it.

I assume the reason they supplied this is because, given what it does, an eGPU chassis is going to need to support some pretty bandwidth for a GPU. In my case though, I'm actually using this chassis not for a balls to the wall kick ass Graphics card, but actually to allow me to attach an old and very humble i/o card from Blackmagic. It's currently working just fine for that purpose.

Thing is, the supplied TB4 cable is pretty short and the chassis along with the ATX power supply mounted on it makes for a pretty hefty desk-space consuming setup. I'd like to move the whole setup somewhere fairly far off from the laptop to save me some precious desk space. I looked up 2m thunderbolt 4 cables which I understand is the longest distance you can get for TB4 and still maintain bandwidth and while it's not too bad, the prices are high for a cable. It occurs to me though that since I'm barely using a fraction of the available bandwidth anyway, could I use other, cheaper, long cables. USB4 comes up a lot in my search for 2m TB4 cables for example. (although they are mostly from AliExpress so don't know how good an idea it is to buy from them). If the chassis has TB4 controllers in it, as does the laptop to which it's attached, can one just put a USB4 cable between them? Are they physically different?

For that matter, since my bandwidth needs are so tiny, could I just find cheaper, longer TB3 cables?

I don't know my terminology very well. I just bought this eGPU enclosure. It also comes with an m.2 slot I suspect that's probably what this 4 pin power slot is for.

I have a spare ATX PSU to power this thing with and it's not modular, the cables come out of the PSU box in a big messy bundle and there's no where to detach or attach cables. There's lots of different connectors that come out of this bundle but alas no square arrangement of 2 rows of 2 pins as needed by this chassis.

There are however 2 such connectors that are kind of joined together through a little plastic catch, but in a manner where you can slide them apart. It's clearly intended that you can be able to separate these if you want to, but them being attached to each other in the first place has me a little worried.

The cable from which they each branch has TKG written on it and each of the connectors has L and R printed on it respectively. If I separate them, I can definitely fit one in to the slot, but is there any reason one shouldn't do this?

UPDATE: It works!! Initially the chassis wouldn't power on but I discovered that if I simply don't plug in the 4 pin slot at all then it does. I'm pretty sure that slot is for powering an m.2 drive if you have one and that was one of the things that made me decide to buy this particular chassis so it doesn't look great but I'm hoping that if I actually had an m.2 drive to test it with, that plugging in that PSU connector to the 4 pin slot would work, but at the moment, when there is no such drive connected, the entire chassis doesn't power on. Even better still, the blackmagic card works!! This is great because the manufacturer actually responded to my email asking if it would work too late and I had already ordered it and they said it wouldn't work so the fact that it does is a big relief. Word of advice for anyone testing this with standard computer monitors instead of proper reference monitors like me, it might say "out of range" or similar on your monitor for a lot of standard video frame rates, but for testing purposes, I was able to get it to work at 60p. No good for a real project, but hopefully with a real reference monitor that wouldn't be an issue.

I occasionally do some paid editing work in my home suite. I use a MBP and I just use whatever storage I have left on external drives or buy new ones as the project budget permits. Most of the time, my work is done on-site using a production company's facilities so it's not a big time operation here at home.

I also like to download and watch video over my wifi to to TV or my phone in other rooms of the house (don't typically move the laptop much). I tend to use the laptop's internal drive for that.

I'm beginning to outgrow my storage for both purposes, but only just. I could continue as I am for quite some time, deleting media at home after I watch it, and buying physically fairly small drives to put away in cupboards for work. However, I'm thinking I could fix both storage needs for a very long time by spending a bit bigger (but not MUCH), and getting a proper RAID. My mind immediately went to NAS, but it occurs to me that, that mightn't necessarily be the most cost effective or efficient way to go given the limited scope of my needs.

My home network is very slow consumer equipment, and I have no ethernet infrastructure at all. I thought I could maybe just hook the NAS up to the laptop via ethernet but then at that point, isn't that just DAS with the extra complications of networking? Would I need a switch between the 2? My home streaming is just done over wifi, since everything is compressed media anyway.

If I buy a decent thunderbolt DAS RAID and expose it to the wifi network via the laptop, would the costs stack up in terms of power consumption and wear and tear of the expensive lappy (given it'd be powered on nearly constantly)? Are there NAS devices that I can directly attach to the lappy for editing, but leave on and connected to wifi for home streaming? Would it need any additional networking equipment in that use case? Can I run jellyfin on it? I feel like a NAS doesn't make sense but would like help puzzling this out.

Last Wednesday was the review embargo for the Ryzen 5 9600X and Ryzen 7 9700X Zen 5 desktop processors that proved to be very exciting for Linux workloads from developers to creators to AVX-512 embracing AI and HPC workloads. Today the review embargo lifts on the Ryzen 9 9900X and Ryzen 9 9950X and as expected given the prior 6-core/8-core tests: these new chips are wild! The Ryzen 9 9900X and Ryzen 9 9950X are fabulous processors for those engaging in heavy real-world Linux workloads with excellent performance uplift and stunning power efficiency.

I have been very much enjoying my time testing out AMD's Zen 5 wares from the Ryzen AI 300 series to the Ryzen 9000 series. The Ryzen 5 9600X / Ryzen 7 9700X were great for whetting my appetite while awaiting the Ryzen 9 9900 series. I had been very much enjoying them to the extent I was rather surprised myself last week when hearing of some reviewers not finding much excitement out of these new Zen 5 processors but typically those just looking at Windows gaming performance or running only a few canned/synthetic benchmarks. Following the Ryzen 5 9600X and Ryzen 7 9700X Linux testing when the Ryzen 9 9900X/9950X arrived, they were put immediately to my gauntlet of hundreds of Linux benchmarks and indeed living up to expectations.

Will AMD release a Ryzen 9000 processor analogous to the Ryzen 9 7900? Non x variant.

Samy Kamkar's latest at Defcon.

Archive link: https://archive.ph/UtTtp

Keyboards have been around for over 40 years and since then not much has really changed in terms of the standard keyboard functionality at the driver/os level.

In the past decade we have seen quite a few keyboards coming out with analogue keys which is great but they are really sketchy to try and actually use for anything as it's not something an OS expects a keyboard to be doing so you need special 3rd party drivers/software which often don't get used in a truly analogue way anyway.

For example in a lot of games analogue directional sticks are the norm, so altering movement speed/sneaking based off the analogue amount is pretty normal, however when you get to PCs you just get keydown/keyup events so you can't process it in an analogue way.

So given we are seeing more keyboards coming out with this functionality at a lower price point is there any company/person/body trying to put together a standard that would allow for analogue key events at OS level or even DirectX (DirectInput) / OpenGl?

I imagine the answer is no, but wanted to ask incase anyone in the know had more info.

Motherboard vendors have begun releasing updated BIOS versions for Intel Core 13th/14th Gen motherboards that offer the new "0x129" CPU microcode that is intended to address the Raptor Lake stability issues that have been causing instability problems and crashing errors for a growing number of Intel Core 13th/14th Gen processors. Intel reported in their (Windows) testing that the 0x129 CPU microcode should offer negligible performance impact but I was curious to run my benchmarks under Linux of this new CPU microcode.

cross-posted from: https://lemmy.world/post/18516067

I wouldn't want to find out the hard way. I have a BMD decklink 4k mini monitor PCIe card. I used to use it in a PC, but I upgraded to a laptop. To replace with an external input device is too expensive unless I downgrade capability significantly.

PCIe chassis are more expensive than expected but I've noticed ones that specifically call themselves 'eGPU enclosures'. For some reason when they're marketed to that specific purpose, they cost a lot less, probably because they often don't come with power supplies (which I actually have spare).

I'm looking at 2 such eGPU enclosures and they are a decent price and I think they should work, but I'm a little scared by them specifically saying "eGPU". Would I likely have any problems buying one of those for my PCIe device rather than for a graphics card? Or is PCIe, PCIe regardless?

The AMD Ryzen 9000 series starting with the Ryzen 5 9600X and Ryzen 7 9700X launching tomorrow are some truly great desktop processors. The generational uplift is very compelling, even in single-threaded Linux workloads shooting ahead of Intel's 14th Gen Core competition, across nearly 400 benchmarks these new Zen 5 desktop CPUs impress, and these new Zen 5 desktop processors are priced competitively. I was already loving the Ryzen 7000 series performance on Linux with its AVX-512 implementation and performing so well across hundreds of different Linux workloads but now with the AMD Ryzen 9000 series, AMD is hitting it out of the ball park. That paired with the issues Intel is currently experiencing for the Intel Core 13th/14th Gen CPUs and the ~400 benchmark results makes this a home run for AMD on the desktop side with only some minor Linux caveats.

I'm looking to replace a 6TB G-Drive for my Mac. I'm considering the OWC Express 1M2 NVMe enclosure along with a WD Black 4TB SN850X.

The drive is mostly used as my photography drive. I work off of it with Capture One. About 20% of it is archive data.

I'd like to upgrade to SSD for the sake of longevity and speed. And because I find the ticking and knocking my existing drive makes to be annoying. And because MacOS does this weird thing where opening random apps causes the external HDD to spin up and stalls operation. I fear everyday that this seven year old drive is suddenly going to die on me.

Just looking for some suggestions if anyone's familiar with these OWC + WD products or if you'd recommend something else.

Back at Computex 2024, AMD unveiled their highly anticipated Zen 5 CPU microarchitecture during AMD CEO Dr. Lisa Su's opening keynote. AMD announced not one but two new client platforms that will utilize the latest Zen 5 cores. This includes AMD's latest AI PC-focused chip family for the laptop market, the Ryzen AI 300 series. In comparison, the Ryzen 9000 series caters to the desktop market, which uses the preexisting AM5 platform.

Built around the new Zen 5 CPU microarchitecture with some fundamental improvements to both graphics and AI performance, the Ryzen AI 300 series, code-named Strix Point, is set to deliver improvements in several areas. The Ryzen AI 300 series looks set to add another footnote in the march towards the AI PC with its mobile SoC featuring a new XDNA 2 NPU, from which AMD promises 50 TOPS of performance. AMD has also upgraded the integrated graphics with the RDNA 3.5, which is designed to replace the last generation of RDNA 3 mobile graphics, for better performance in games than we've seen before.

Further to this, during AMD's recent Tech Day last week, AMD disclosed some of the technical details regarding Zen 5, which also covers a number of key elements under the hood on both the Ryzen AI 300 and the Ryzen 9000 series. On paper, the Zen 5 architecture looks quite a big step up compared to Zen 4, with the key component driving Zen 5 forward through higher instructions per cycle than its predecessor, which is something AMD has managed to do consistently from Zen to Zen 2, Zen 3, Zen 4, and now Zen 5.