zerowaste

1800 readers
1 users here now

Discussing ways to reduce waste and build community!

Celebrate thrift as a virtue, talk about creative ways to make do, or show off how you reused something!

founded 3 years ago
MODERATORS
101
 
 

This was a recent one, kind of the start of refinishing furniture with the intent to give it away on our local Buy Nothing -type page. We found this old kid-sized chair on the curb on garbage day. The finish (some kind of shellac, I think) was peeling or gone in places, the wood was a bit weathered, scuffed, and water stained.

I sanded it down and posted a photograph of it with the bare wood, surrounded by cans of stain, to the facebook group, offering it up with a promise I’d stain it whatever color they picked form the pile (or provided themselves) and urethane it. I ended up having to do a little raffle as there was a decent amount of interest. The winner picked a nice medium brown color and I stained it and urethaned it.

The person who received it was delighted – it turned out she was a retired teacher, and had fond memories of these chairs. She brought us a pot-holder her granddaughter had knitted to thank us for it (which was unexpected but very nice!).

102
2
submitted 2 years ago* (last edited 2 years ago) by JacobCoffinWrites@slrpnk.net to c/zerowaste@slrpnk.net
 
 

This was an interesting one – we found this table on the curb on garbage day. The finish on the tabletop was peeling and rough. Possibly from water damage? We knew it would be challenging because the surface had a very thin wood veneer on it, but it wasn’t likely to be taken by anyone else in this condition so we lugged it home to try fixing it.

We had to sand the finish off, but we also had to be careful to avoid sanding through the veneer. We used a very smooth sandpaper (starting with 220 grit) and carefully sanded with the grain for each panel so as not to scratch the wood.

Once we had it completely cleaned off, we finished it with high gloss polyurethane. I don’t think we stained the wood first but it’s been awhile and it’s possible we did. This picture is during the first coat (applied following the grain). Once it was dry we sanded very lightly, wiped away the dust, and coated it again.

When I think about salvaging these things, I tell myself it's not just the wood (decompostable or burnable for power) that I'm salvaging, but the resources and person-hours spent making it. Trees were cut and hauled and milled to size, the pieces transported, machined down, turned on lathes, planed, routed, cut, and glued. Even on a factory-made piece there's a bit of history and it's worth keeping around if possible.

103
 
 

So I’m a huge fan and advocate of groups where people give away things they don’t want anymore. And if it’s cool, I’m just going to rant about them for a bit.

What are they:

So for this, I’m talking about online groups, usually covering a very small geography like a town, where people can either offer up things they don’t want anymore rather than throwing them away, and where people who need things can post a request or In Search Of (ISO) for specific things in case anyone has one they don’t need.

Why they’re good:

They help people find things they need without money changing hands. Whether you’re struggling financially, or just getting something you’d otherwise have spent money on, it makes everyone’s life a little easier.

They connect people to their neighbors. I’ve met hundreds of people from my city over the last few years, some frequently, some just once. My favorite has been getting to know my nextdoor neighbor as we cleaned out his house – the circumstances weren’t great, but for months I saw him every day when I helped him photograph items, find people who wanted them, and give them away. We became pretty good friends through the process, and because he’s the kind of guy who sits on his front porch and talks with anyone who’ll stop, he had an awesome time visiting with everyone who came to get something.

It knocks items out of the “resources extracted → product sold → product used → product thrown away” cycle, at least for a little bit.

I can remember walking around my neighborhood years ago and seeing someone unwrapping brand new tomato trellises (we were also planting at the time), then a few streets over, finding a stack of them leaning against a trash can, and just being struck by the disconnect there. Here was a stack of metal on its way to (hopefully) recycling, while someone else had had to buy the same thing to do the same job brand new. Somewhere steel and other metals had been extracted as ores, transported, smelted, cast into wire, possibly transported again, shaped/welded into a trellis, wrapped in plastic, transported again, bought at a store, and transported again. But because the person throwing them away and the person who needed them were disconnected, one set was going to be transported to the dump while a new one was being set up. It’s a small and kind of silly example, but it happens constantly, with tons of items, just in the waste stream.

I have access to an e-waste bin where companies throw away functional computer monitors, laptops, tablets, mice, cables, adapters, monitor stands, and all kinds of other bits and pieces. I carry great bags of them home and offer them up on my local group. So far, I’ve found interested people (usually tons of them) for each item I’ve brought back. I consider reuse and continued use to be much better than recycling, especially for functional tech, and at the same time, it helps my community, providing devices to people who need them. (I’ve recently started diverting the working computers and tablets to a local charity helping Ukrainian refugees, many of whom have no computer/device at all – this helps them get on their feet, work on resumes etc).

Then there’s the items that people are holding on to because they don’t want to throw them away, but aren’t using/don’t need. A few years ago I asked if anyone had a digital picture frame, so I could set one up for my grandmother. A lady from my city said she had one sitting in a closet, she’d bought it for her mother but it never got used, and she didn’t want to throw it away still new in its box. I saw an ISO for an Apple computer monitor (an old CRT version) and checked with my neighbor, who I knew had been putting off driving some monitors to the recycling center because of the fees and because they’re heavy. He had the exact model the guy wanted – and the guy was thrilled, because it’s not like they’re making new antique monitors. Every one recycled is that many fewer components available to people who are into collecting and building those machines. Even better, my neighbor and the guy who wanted the monitor appear to have hit it off and are becoming friends.

We’d already filled our apartment with reclaimed/fixed-up furniture, but I’ve recently started making a hobby out of finding furniture on garbage day, refinishing them, and giving them away. My goal has been to never use new-bought materials, and thanks to the lumber, stain, urethane, paint, etc frequently available in my group, I’ve mostly been able to do that.

Finding these groups:

They seem to work best if they’re very local organizations. So far they seem to be mostly set up on facebook, but I’ll be happy to showcase any other examples anyone has. The biggest and probably best organized one I have found is Buy Nothing:

https://buynothingproject.org/find-a-group

I feel like I should mention that there’s been (as in all things that involve groups of people) a good deal of drama within some of these groups, especially under the Buy Nothing name/brand. It generally looks to me like people who want to do good for each other and their communities, but just disagree on the best way to do it, but you may want to look for local alternatives. My favorite groups operate under the name Everything is Free, which appears to be a bit less formally/centrally organized, but because of that, probably a bit harder to find/less organized.

https://www.curbed.com/2023/02/buy-nothing-gifting-with-integrity-drama.html

There are also dedicated websites like freecycle, and the Buy Nothing app – I think there’s some value to setting these things up in the spaces people already occupy, but as someone who has increasingly fled into federated alternatives, I can also understand wanting to disconnect from big social media sites.

104
 
 

One of my hobbies is restoring/building furniture in a zero waste kind of mindset, where all my materials are either from EIF or found on garbage day. Ideally the only waste is my own hours/calories and the electricity (though I do pay the local company for what they assure us is all green energy). If it’s okay with the instance, I’d love to share some of them here. (I think they’ll fit better here than in DIY as I’m not really giving the kind of thorough steps necessary to build one yourself)

I’m fairly active on my local Everything is Free page, which has been awesome. It’s a wonderful community dedicated to helping each other and reducing waste, and my first real step towards meeting my actual community since moving to this city (besides meeting my neighbors in the building and next door).

Awhile back someone posted an In Search Of for a saddle stand. They rented a horse but owned a saddle and apparently you can’t store them flat. They had a sewing machine case they were using for it, but were looking for a towel rack or similar that would look a little nicer.

I have a decent little wood shop in the basement of our apartment, and have hoarded a lot of lumber (and more lumber shows up on EIF every day) so I offered to just build one to her specifications. It was a really fun project, she was super friendly and flexible about the design/timeline, which worked out well because it took me a little over six months to make it – though most of that was time spent waiting for suitable materials to show up.

A quick search of the internet showed two types of stands I thought I could make – pedestal ones, and traditional ones with flat sides on either end. Flat sides were definitely more practical, as you can add a shelf to store things underneath, but they would have required 1”x12”s or something equivalent, which I didn’t have. So I decided to focus on the top and wait to see what showed up.

The slats are cut from old oak floorboards I pulled from a dumpster when a local furniture maker/finish carpenter was retiring and cleaning out his workshop. We got talking and he gave me some nice stuff as well, including some thin slats of some exotic hardwoods neither of us could identify. The hardwoods and oak floorboards I ripped to the final size using a tablesaw and plainer.

The project went on hold for lack of time and materials for awhile, until a neighbor threw away a nice pedestal table. They had disassembled the thing, including stripping all the hardware that normally hinged and supported the two leafs, so I didn’t feel too bad about taking its base right before the garbage truck got there (I took the top too, and plan to use it as well but I’ll get to that at the end)

I was then able to work out a design for the stand using the pedestal. I drew up two endcaps and cut them from some beautiful oak cabinet wood the furniture maker had given me (getting both endcaps out of the piece was tricky). Then, to support all the slats, I cut two smaller versions of the same shape from scraps of an ikea bookshelf I’d used in building an arcade cabinet (a different, more ambitious zero-waste project). The smaller pieces were pine, which wouldn’t match the oak base in grain, but it wouldn’t matter because they’d be hidden by the bigger endcaps and the slats on the tops/sides.

I assembled these pieces, stained them to match the base as closely as I could get it using stains I already had (mostly golden oak I already had, but also some very old stains from my grandparents’ basement which hadn’t been brought to the dump yet, and which helped get the different woods to match) and urethaned it with gloss polyurethane.

To support the upper part I took the last piece of a very warped 2”x”6, I’ve been slowly using up, sanded it until it was roughly square, and drilled holes so I could use the table’s original bolts to attach it to the stand. (I stained it as well). I leveled it the rest of the way and made sure the endcaps would cover it entirely by cutting a notch into either end. Then I set the top part on it, and drove six screws up through the bottom of that into either endcap.

It’s not my biggest zero waste woodworking project, but I think it came out well, and they were really happy when they came to get it which was nice.

105
 
 

cross-posted from: https://feddit.de/post/678430

106
 
 

I learned about reusing (carefully cleaned and dried out) juice bottles to use to store dry foods like lentils, rice, flour, sugar, etc. I am excited to do this. I am also using milk jugs but some people would only use PETE plastic. Here are some links. https://www.thriftyfun.com/Reuse-Jugs-for-Dry-Foods.html https://theprovidentprepper.org/packaging-dry-foods-in-plastic-bottles-for-long-term-food-storage/ it should keep insects out but rodents can chew through the plastic. if you have a rodent problem you can just store the jugs of food in thicker plastic containers though

107
 
 

you can wash out and reuse the little plastic tub containers that things like yogurt and cottage cheese come in and if you like, you can remove the ink labeling with a cloth or paper towel, 100% acetone nail polish remover, and a little bit of elbow grease I'm really excited about getting free containers

108