this post was submitted on 23 May 2025
188 points (90.2% liked)
Technology
70285 readers
3132 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related news or articles.
- Be excellent to each other!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, this includes using AI responses and summaries. To ask if your bot can be added please contact a mod.
- Check for duplicates before posting, duplicates may be removed
- Accounts 7 days and younger will have their posts automatically removed.
Approved Bots
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
New cars absolutely do have dipsticks; they're the ones designing them.
Notwithstanding the potential for software bugs or other issues inherent with monitoring oil levels only digitally, monitoring just the oil level is not the sole purpose of the dipstick. Being able to physically see a sample of the engine oil is a vital diagnostic tool and can alert an owner or mechanic to a head gasket problem or other oil contamination issue, or if something is grinding metal shavings into the oil, etc.
For what it's worth I have yet to actually physically see a new vehicle without an oil dipstick. I guess they're out there, but so far I've been lucky. But I have already had quite a few automatic transmission equipped cars without a transmission dipstick cross my path, and that's already enough of a pain in the ass. If you're lucky there's a side plug in the transmission case you can use to check the fluid condition and level (after crawling under the vehicle...) but in a lot of cases there isn't even that -- your only recourse is to drop the transmission pan off entirely, which causes you to lose all the fluid in the process. And you'll probably also have to replace the gasket while you're at it. Needless to say, this is an incredibly moronic design decision.
My wife has a 2015 Jeep Grand Cherokee. The AC condenser got a leak in it and it was going to be over $2k to fix in a shop. I took it on myself to save money. The condenser mounts to the back of the radiator, so I had to get at it by removing the bumper and everything between that and the engine block. Also attached part of the radiator is the transmission cooler. Unhooking everything meant that I was going to lose some fluids, but that was fine, I'd top them off and pay to have refrigerant added.
After I reassembled, I when to check the trans fluid levels, and couldn't find the dipstick. It turns out, like you said, if you crawl under the vehicle, on the back of the trans pan is a bolt you can remove, and if you have a special dipstick that you buy separately for this sole purpose, you can stick it in there to check levels. There's not way to add fluid without pumping it in there, but at least you can see how much you have.
Since I only lost less than a quart, I took it into the shop, explained what's up, and asked for it to be topped off. The shop guy calls back later, and told me that to do the trans fluid, the filter is only sold with a whole new pan, and because Chrysler, the fluid cost like $40 a qt, and I needed like 15 to fill it. It still cost more than $800 to just do that, then more than $500 for the refrigerant. I still saved about $500-1k in parts and labor for what I did, but, the lack of dipstick and fill tube was an extremely inconvenient and expensive thing.
Well the good news is your trans should last a little longer now that some of the fluid has been replaced.