this post was submitted on 04 May 2024

20 points (95.5% liked)

Linux Gaming

22663 readers

164 users here now

Discussions and news about gaming on the GNU/Linux family of operating systems (including the Steam Deck). Potentially a $HOME away from home for disgruntled /r/linux_gaming denizens of the redditarian demesne.

This page can be subscribed to via RSS.

Original /r/linux_gaming pengwing by uoou.

No memes/shitposts/low-effort posts, please.

Resources

WWW:

Discord:

IRC:

Gaming on Linux

Matrix:

Telegram:

Gaming on Linux

founded 2 years ago

MODERATORS

monolalia@lemmy.world

Xbox controller over dongle (lemmy.world)

submitted 2 years ago by fluckx@lemmy.world to c/linux_gaming@lemmy.world

9 comments fedilink hide all child comments

Hello fellow Linux gamers!

I've recently switched to nobara for gaming. I've had no real issues so far and it's all running smoothly! Queue my Xbox controller.

A year or two ago I bought an Xbox wireless control ( 2020 version according to the order ). Now I wanted to use the controller, but it is not being detected. The light keeps blinking. On nobara itself it looks like it mounted the dongle as a USB Stick.

That would explain why the controller isn't connecting.

How would I best go at tackling this? Any tips? I've already ran the following command:

nobara-controller-config

This installed some drivers and required a reboot ( which I did ).

Thanks in advance for any guidance or tips!

all 11 comments

sorted by: hot top controversial new old

[–] zelifcam@lemmy.world 11 points 2 years ago (2 children)

install xone

https://github.com/medusalix/xone

[–] fluckx@lemmy.world 6 points 2 years ago (1 children)

It seems it was part of the solution!

When I tried to install it using install.sh I got the message that it was already installed.

I had a look at dmesg and found the following entries:

[ 1634.510594] xone-dongle 3-2:1.0: Direct firmware load for xow_dongle.bin failed with error -2
[ 1634.510601] xone-dongle 3-2:1.0: xone_mt76_load_firmware: firmware not found
[ 1634.510604] xone-dongle 3-2:1.0: xone_dongle_init: load firmware failed: -2
[ 1634.511456] xone-dongle: probe of 3-2:1.0 failed with error -2

Inside the repository I cloned I found an install/ directory with a firmware.sh file in there. I ran that as root and it installed the driver.

I plugged in the dongle again and it worked immediately!

( I looked at what the script did first though ).

Thanks for the help!

[+] zelifcam@lemmy.world 3 points 2 years ago* (last edited 2 years ago) (1 children)

[deleted]

[–] fluckx@lemmy.world 1 points 2 years ago (1 children)

Those are the steps I took as described in the README.md. Nobara added a custom command called nobara-controller-config which installs the xone drivers. I guess something must have gone wrong there that the dongle firmware was missing. https://nobaraproject.org/docs/xbox-controllers/known-issues/

I might have just missed it.

Running the third step of the README.md leaves me with this output:

sudo ./install.sh 
Driver is already installed!

I assume there is no xone-get-firmware.sh file in the xone directory as a result.

All is well that ends well :)

[–] Nibodhika@lemmy.world 0 points 2 years ago (1 children)

Read what the other guy told you, see if your distro has a package for this instead of following the readme file, otherwise you'll need to run that every time your kernel updates. There's a reason we recommend people to use the package manager and to forget the windows mentality of installing things by random means.

[–] fluckx@lemmy.world 2 points 2 years ago (1 children)

The Nobara-controller-config command is the is way to install it as far as I can tell by the docs. I'll try reinstalling it that way and see if it recognises it by default.

I agree that the package manager way is the preferred way to go. I fell back to the github repo because it didn't work :)

[–] TheSun@slrpnk.net 1 points 2 years ago (1 children)

Probably need to uninstall the xone driver you already installed from that link. Then open the welcome screen again (super key + type welcome, should be there) and there's an option to install the xone and xpadneo drivers already setup for nobara on one of the tabs there.

[–] fluckx@lemmy.world 1 points 2 years ago

Yeah I didn't reply anymore, but I did an uninstall, removed the dongle, rebooted, reinstalled it, rebooted, plugged in the dongle and it instantly worked.

I must've done something wrong the first time #pebcak

[–] fluckx@lemmy.world 1 points 2 years ago

I will try that later today!

[–] robertrichter@lemmy.world 1 points 8 months ago* (last edited 8 months ago)

install xone https://github.com/medusalix/xone geometry dash lite

Thanks for your suggestion. This is what I'm looking for.