homeassistant

15001 readers

2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Pairing a Hue bulb on Home Assistant with serial number? (removing hue bridge) (lemy.lol)

submitted 3 months ago* (last edited 3 months ago) by flork@lemy.lol to c/homeassistant@lemmy.world

10 comments fedilink hide all child comments

I'm trying to remove the Hue bridge from my home network but can't seem to get Home Assistant to find the bulbs over Zigbee. Even the Hue app can't find them unless I use the "use serial number" method.

I deleted the lights from the Hue app
I factory reset the lights (using dimmer switch method)
I clicked "add device" in home assistant... aaand nothing. Just "Searching for Zigbee devices…"

I thought the problem might be wifi interference but I turned off my 2.4ghz network and still nothing.

I have other Zigbee devices successfully connected to my dongle, (Sonoff) and I can pair the bulbs with Hue bridge, but only using the serial number method.

Any ideas as to what might be going on?

Update: To any future readers, I set up Zigbee2Mqtt and everything works really great now and pairing was a breeze.

you are viewing a single comment's thread
view the rest of the comments

[–] y0din@lemmy.world 0 points 3 months ago

I did not use the remote, only enabled permit join in zigbee2mqtt. I don't even own a remote.