this post was submitted on 29 May 2025
197 points (99.0% liked)

3DPrinting

18428 readers
134 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

I have a cheap/quick/dirty deer and rabbit fence around our vegetable garden. The doors are simple PVC squares with deer netting that used to attach to the fence via hooks at the top. This design turned out to be very fiddly. The new design seems much easier to manage - simply drop the door section into its slot.

you are viewing a single comment's thread
view the rest of the comments
[–] TootSweet@lemmy.world 6 points 1 week ago (4 children)

I never would have thought to print them at an angle like that, but thinking it through, I bet relative to other obvious-ish options, it a) improved part strength (particularly along the axes where you most need strength), b) saved a bit of material, c) improved bed adhesion. Smart move in general. I'll have to keep that approach in mind for my own prints.

[–] IMALlama@lemmy.world 8 points 1 week ago (3 children)

Printing things at a 45 degree angle is a magic cheat code for tons of overhangs. It can also help give your prints more resolution as most designs tend to not care if the "tall" layers are diagonally oriented.

[–] Landless2029@lemmy.world 3 points 1 week ago

Props for proper print orientation for stress distribution.

load more comments (2 replies)
load more comments (2 replies)