this post was submitted on 20 Aug 2025
65 points (98.5% liked)

Dad for a Minute

763 readers
2 users here now

If you need encouragement, advice or just a hug this is the right community for you. Your "dad for a minute" is here to help. Moms are welcome too.

Note that this is an inclusive community. Everyone is welcome.

Twin communities you might be interested in

Rules No hate speech, discrimination, insults. Just be a nice internet user.

founded 11 months ago
MODERATORS
tired_n_bored@lemmy.world
65
Dad how do I fix my door handle? (infosec.pub)
submitted 1 month ago by LadyButterfly@piefed.blahaj.zone to c/dadforaminute@lemmy.world
31 comments fedilink hide all child comments
 

Dad my bedroom door handle won't stay up so the door won't shut. How do I fix it?

you are viewing a single comment's thread
view the rest of the comments
[–] Nougat@fedia.io 55 points 1 month ago (2 children)

@LadyButterfly@piefed.blahaj.zone You're going to buy a new handle/latch set and replace it. It's super easy, and all of this stuff is standard, so you don't have to figure out "which one you need" really. The Philips screws there obviously have to come off. The little hole in the bottom of the handle conceals a screw that holds the handle on (both sides). That might be a Philips, might be an Allen.

The latch plate comes off, the handles come off. Behind the round trim pieces, there will be some more Philips screws that hold another bit in that has to come out. Once that's out, the latch will slide out the side of the door.

Installation is reverse of removal. Seriously, this is an easy and cheap fix, even if you have to buy a couple of tools, too. Everything you need will be at your local home improvement store.

[–] LadyButterfly@piefed.blahaj.zone 23 points 1 month ago (1 children)

That's really easy to follow thanks dad! I'll pop to the hardware store tomorrow

[–] Nougat@fedia.io 18 points 1 month ago (1 children)

@LadyButterfly@piefed.blahaj.zone In case you missed this from @fakeman_pretendname@feddit.uk

Just to add to this - you might find there's 3 different depths of the latch mechanism bit (the bit inside the door), so take the existing one out first to help getting one the same size.

Definitely do that.

[–] LadyButterfly@piefed.blahaj.zone 11 points 1 month ago

I did miss it thanks dad

[–] fakeman_pretendname@feddit.uk 11 points 1 month ago (1 children)

Just to add to this - you might find there's 3 different depths of the latch mechanism bit (the bit inside the door), so take the existing one out first to help getting one the same size.

[–] LadyButterfly@piefed.blahaj.zone 9 points 1 month ago (1 children)

Ooooh good tip thanks dad

[–] fakeman_pretendname@feddit.uk 6 points 1 month ago (1 children)

Good luck! You can do this! :)

[–] LadyButterfly@piefed.blahaj.zone 6 points 1 month ago

Thanks dad! Better warn mom you might have to pop round this weekend to undo the damage I cause haha