Ask Electronics

3881 readers

5 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 2 years ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de

Lithium pouch cell protection circuit? (imgur.com)

submitted 6 days ago by tuff_wizard@aussie.zone to c/askelectronics@discuss.tchncs.de

5 comments fedilink hide all child comments

Trying to trouble shoot a cheaper wireless meat thermometer. It was working find when put away last year.

Now won't turn on or respond when put on charge.

The lithium pouch cell looks fine and reads 3.5v at the battery tabs. No voltage read on the output of the small circuit board attached to the pouch cell. A bit of googling has lead me to believe it is some kind of "battery protection circuit" or possibly a BMS or charge controller. I have found many similar ones but no exact match on AliExpress. It reads QLD-3036.

If anyone is familiar with those little boards can they let me know

If there would be any reason it would be stopping power getting from the battery to the main unit?

If there is some easy way to reset the board?

If the small board modifies the voltage of the battery at all and if not would it be ok to bypass the small board and supply dc to the main board where the red and black wires connect for testing purposes? I have a variable power supply and would have no issue with converting this unit to run connected to a power supply permanently.

you are viewing a single comment's thread
view the rest of the comments

[–] g5pw@feddit.it 1 points 3 days ago* (last edited 3 days ago)

Uh that is unfortunate :/ battery protection circuits do not usually care about capacity directly, but just about max currents (which is usually related to capacity), so… unless you need a lot of current, get a 2A limiter and you should be good.

Try not to short anything else, like the battery terminals though! It may weld stuff into a continuous short and start a fire.