this post was submitted on 15 Nov 2025
35 points (100.0% liked)

Do It Yourself

8406 readers
7 users here now

Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!

Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
Gaywallet@beehaw.org
alyaza@beehaw.org
circularfish@beehaw.org
35
Electrically savvy folks, does the bottom wire look corroded to you? (infosec.pub)
submitted 5 days ago by reallykindasorta@slrpnk.net to c/diy@beehaw.org
25 comments fedilink hide all child comments
 

I’m in an apt. and the power has been shutting off lately. It doesn’t trip any of the breakers in the breaker box inside the apt. but it does trip the master breaker on the box outside. Thought it was an oven issue but it still happens with the oven breaker off.

Visual inspection of the breaker box outside shows one of the wires looks a bit corroded. Wires to/from the rest of the units are a nice copper color. Is that a red flag?

Landlord is dragging their feet and telling us to talk to the electric company, and electric company is saying to call a licensed electrician, so I’m just trying to understand the issue so hopefully the landlord will listen to me.

you are viewing a single comment's thread
view the rest of the comments
[–] Septimaeus 2 points 4 days ago* (last edited 4 days ago) (1 children)

Damn that’s convenient!

Yes, the simplest adapter style is a chunky wall wart, usually cheapest. Otherwise inline modules are common. For either, you just plug them in between the plug and its outlet and press the “reset” button. 15-amp 125v example from a common US supermarket ($14).

And if by extender you mean the multi-outlet strip extenders: yes, the adapter+extender would isolate the fault to just that strip. If ground fault occurs, everything on that strip turns off. You can also find power strips with built-in GFCI.

The only additional consideration re: which GFCI adapters you will need are

  1. Voltage and amperage rating: you can just copy the rating of the outlet’s breaker

Where to find markings of circuit breaker rating

…or, if it’s just handling one appliance, take a picture of the power specification, usually a sticker on the back of the appliance, which should give you minimum amperage rating of GFCI

example of appliance rating sticker

  1. Socket type: if you’re in the US, likely all type B or maybe one or two type I (large 220V appliances) from this chart:

Most common international plug connector types

Edit: pictures

[–] reallykindasorta@slrpnk.net 3 points 4 days ago (1 children)

Excellent, I will grab a couple that will be especially helpful for the kitchen where we occasionally accidentally run the microwave at the same time as the kettle.

I’ll still prod the landlord to have someone come look at the power main issue.

[–] Septimaeus 3 points 4 days ago (1 children)

That’s great. And glad youre pressing landlord. They’re very likely obligated to cover expenses related to this, but I understand landlords are shitheads and a PITA.

Just to be clear, re: MW+kettle example, typical GFCI won’t prevent that overload. Circuit breaker should trip. There is a similar component that does both (AFCI) but it’s more expensive and shouldn’t be needed if your breaker is functioning correctly. Adding GFCI is usually inexpensive enough to justify but is only meant to protect against faults, not overloads.

[–] reallykindasorta@slrpnk.net 3 points 4 days ago

I see, thanks for clarifying!