If GE/whatever company can be trusted it is. What isn’t though is the enamel paint that is on top of the glass that keeps the bottom of your pan from totally coming into contact with the glass.

You should really try a plastic scraper first.

[–] dual_sport_dork@lemmy.world 26 points 16 hours ago (2 children)

The manufacturer literally recommends you use a regular razor blade in the manual. This is from a GE manual, since you brought them up:

And so does the manufacturer of the most popular ceramic glass material used. A plastic scraper won't accomplish much, especially if the plastic it's made out of is softer than whatever is stuck to your cooking surface.

The markings are etched into the glass, not painted.

[–] kieron115@startrek.website 10 points 16 hours ago* (last edited 16 hours ago)

Thanks for posting this. Holding the blade at the correct angle and putting the correct pressure on it is key.

[–] atomicbocks@sh.itjust.works 1 points 12 hours ago (1 children)

Interesting. The manual from the GE cooktop I bought two years ago does not say this.

[–] dual_sport_dork@lemmy.world 1 points 11 hours ago

Just for grins, here's a manual for the oldest discontinued GE electric cooktop I could find on short notice. Note the publication date of 2017. Your card is on page 16:

https://pdf.lowes.com/useandcareguides/084691809609_use.pdf

This one is so crusty they're still referring to Cerama Bryte by name. One wonders exactly when that licensing deal fell through...