this post was submitted on 17 Mar 2026
11 points (92.3% liked)

Ask Electronics

4075 readers
1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 2 years ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
11
Lenovo USB-C PSU for laptops powers a Rasberry Pi, but cannot simply charge bicycle lights. WTF? (infosec.pub)
submitted 6 days ago by evenwicht@lemmy.sdf.org to c/askelectronics@discuss.tchncs.de
15 comments fedilink hide all child comments
 

I bought a 2nd-hand Lenovo USB-C PSU (ADLX65YLC3D) which indicates a range of voltages (20v, 15v, 9v, 5v) on the label. Tried to charge a few different bicycle lights but the charging indicators did not light up on any of them. I almost tossed it because the 2nd-hand market I bought from is definately dodgy. But then I tried to power a Rasberry Pi and it seems to work on that. So wtf? An a/c adapter either works or it doesn’t. What would cause this: works on some devices but not others? The Rasberry Pi needs 5v just as the bicycle lights. That is the default voltage for USB-c.

you are viewing a single comment's thread
view the rest of the comments
[–] Notsosuperfloh@discuss.tchncs.de 11 points 6 days ago (1 children)

Most usb- c pd adapters wont put ouz any voltage on their own. the end device must tell the adapter what voltage they want via the cc pins. on the raspberry pi this is done via resistors between cc1 snd cc2 to get 5v. those pins are most likely unpopulated on your bycicle lights, so they get no power.

[–] brillotti@lemmy.world 4 points 6 days ago

This is correct. I made my own USB C to 30 pin adaptors for old iPods and this is precisely how I had to build them.