this post was submitted on 06 Apr 2026
15 points (100.0% liked)

homeassistant

19059 readers
33 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
15
Disappointed with Aqara - Zigbee hub, but no 3rd party? (sh.itjust.works)
submitted 7 hours ago by CocaineShrimp@sh.itjust.works to c/homeassistant@lemmy.world
11 comments fedilink hide all child comments
 

Correct me if I'm wrong, but...

Buyer Beware! Aqara hubs use the Zigbee protocol, but lock out 3rd party devices!

A few months ago, I bought an Aqara hub and went deep into their ecosystem. I saw their hub and sensors had good reviews, plus they were using the Zigbee open protocol, so I figured I'd stick with their stuff. I had no reason to try other devices until recently.

I picked up a tilt sensor for my garage door from a 3rd party. I made sure it was also using the Zigbee protocol, so I assumed it would be compatable. Unfortunately, when I tried connecting it to the hub, I was wrong and it wouldn't connect. Turns out, Aqara uses the Zigbee protocol, but locks out 3rd party devices. [source]

If anyone has a workaround to integrate a 3rd party device with an Aqara Hub (IIRC, I have the M3?), I'd love to hear about it. But until then - I'm looking for a refund. I would have never picked up their hub if I had known about their shennanigans; and consequently, I wouldn't have picked up so many of their sensors.

you are viewing a single comment's thread
view the rest of the comments
[–] ropatrick@lemmy.world 2 points 6 hours ago (1 children)

Speaking of devices, I'm actually still using an ancient Conbee II and it's rock solid. I thought about changing it recently and ordered a ZBT-2 for a more up to date product, but then I realised I was insane and set it up as a Thread Border Router instead, so I have both now.

[–] avidamoeba@lemmy.ca 1 points 4 hours ago (1 children)

I just got ZBT-2 for my first Matter/Thread device and hooked it up to my HA Yellow. This thing now does ZigBee, Thread and Z-Wave. 😆

[–] ropatrick@lemmy.world 2 points 2 hours ago

Winning at protocol mastery. I commend thee.