this post was submitted on 18 Sep 2023
40 points (97.6% liked)

homeassistant

15057 readers
11 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
40
If you would start again, how would you do it? (feddit.de)
submitted 2 years ago* (last edited 2 years ago) by glasgitarrewelt@feddit.de to c/homeassistant@lemmy.world
24 comments fedilink hide all child comments
 

It seems that there are a lot of things to consider before even buying the first smart device. How would you start when you would start over?

Are there any good beginner guides that helped you?

Important points for me are

  • privacy (everything should be local, no Alexa-Karens in my home)
  • use of open source/free software
  • a good variety of smart things I can use (I don't want to be tied Apple-like to only one company)

Is there a golden way to build a smart home with these factors in mind?

you are viewing a single comment's thread
view the rest of the comments
[–] CmdrShepard@lemmy.one 3 points 2 years ago (1 children)

These are using mmWave radar, so look for those type of devices if you want sensors that can detect whether you're in the room while stationary. Most of the cheap sensors use PIR which only detects motion.

[–] ArbiterXero@lemmy.world 2 points 2 years ago

That’s correct! I actually work in the mmW radar field, it’s super fun!