this post was submitted on 01 Oct 2023
19 points (95.2% liked)

homeassistant

15001 readers
2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
19
Lowest latency input (lemmy.nz)
submitted 2 years ago by Sim@lemmy.nz to c/homeassistant@lemmy.world
14 comments fedilink hide all child comments
 

I'm using a ZigBee button to call an automation which notifies via Pushover and Alexa. Works fine.

I'd like to reduce latency and use a physical button. I can use a Pi, ESP32 or similar to respond to a closure and tell HA.

What's the lowest latency input to HA? My MQTT server is separate so I'm thinking an HTTP post direct into HA might be best.

Is there anything faster? HTTP is fast enough in my testing, it's an experiment as much as anything else.

you are viewing a single comment's thread
view the rest of the comments
[–] Sim@lemmy.nz 1 points 2 years ago

I'm interested in what other people have found to be the fastest way to deliver events into HA. It's been a useful thread.