homeassistant

15319 readers

3 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Any advice on making the swap from ST to HA? (lemmy.world)

submitted 2 years ago by Naberius@lemmy.world to c/homeassistant@lemmy.world

6 comments fedilink hide all child comments

Hi everyone. I know there on tons of posts on the old sites threads about the mechanics of swapping from smart things to HA. Just wondering if you all have any advice on other things that might come up?

I'm about to move in to a new house. I have an instance of HA working on a little pc. I have tons of smart bulbs connected to ST, hue and others. My wife is an angel, so I probably have a good amount of time to get this right, but I also want her happy lol.

Anything I should look out for? Any personal nightmares of making your own swap? Thanks

you are viewing a single comment's thread
view the rest of the comments

[–] buddhra@lemmy.world 2 points 2 years ago

I've done it both ways. In either case, you at least need an access point that's capable of handling the number of devices you plan to have on the network, but it's good to have a dedicated AP with a separate SSID on a different channel.

Some people even segment networks with VLANs to isolate devices, so that's a consideration too.