Home Automation

89 readers

5 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 2 years ago

MODERATORS

communick@selfhosted.forum

Low voltage wiring (alien.top)

submitted 2 years ago by DragonYevaud@alien.top to c/homeautomation@selfhosted.forum

7 comments fedilink hide all child comments

I’m planning on setting up full color LED strips (think neopixels) as lighting in various locations in my house. Stairs, bathrooms, under beds, along the ceiling/wall lines are my immediate plans. The problem I have is how to power these conveniently as many of these locations don’t have outlets and I would prefer not to be running a wire up a wall or over the staircase edge to power these. I haven’t been able to find a good solution and am hoping for some good suggestions from your person experiences.

you are viewing a single comment's thread
view the rest of the comments

[–] wivaca@alien.top 1 points 2 years ago

Yup, that'll work. Wasn't clear if you had a lot of experience with these strips before.

I'm just getting into ESP32 because, like you said, RaspPis are overkill. Like running a mini PC just to make some lights blink. I do some matrix stuff where the extra compute power and UI flexibility is helpful during development but it's overkill even for that.