homeassistant

14941 readers

2 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

269

Chamberlain shuts off access to MyQ’s APIs, breaking smart home integrations (www.theverge.com)

submitted 2 years ago* (last edited 2 years ago) by dmtalon to c/homeassistant@lemmy.world

58 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] scemmy@lemmy.world 3 points 2 years ago (1 children)

I use this: https://www.thesmartesthouse.com/products/diy-smart-garage-opener-kit-zooz-multirelay-ecolink-tilt-sensor

It's a bit finicky. If I open the door through home assistant, it prevents me from operating the door through the manual opener until I click twice. Otherwise, local opener has no power. Not sure if I installed it incorrectly.

But it works fine, otherwise.

[–] MystikIncarnate@lemmy.ca 3 points 2 years ago

I don't know if my opener has the dry contacts required to make a solution like this work. I'm not keen on hacking the remote or anything. I might have to replace the opener before I have the right contacts to use something like this..... which might be the plan, I'm going to take a close look at the specific unit I have and find the model and manual tomorrow, and see what's in the manual before I do anything more....