this post was submitted on 06 Nov 2023
17 points (90.5% liked)

homeassistant

15310 readers
4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
17
What do you with physical light switches connected to automations? (lemmy.world)
submitted 2 years ago by xantoxis@lemmy.world to c/homeassistant@lemmy.world
29 comments fedilink hide all child comments
 

I'm setting up with HA and zigbee smart bulbs. I've got a few automations already set up, such as turning on a bunch of lights in the morning and turning most of them off again at night.

All these lights still have physical switches. I don't want to take those switches out for lots of reasons, and putting smart switches there seems like overkill when the bulbs are already smart. What are people doing with their physical light switches to ensure that they don't get flipped?

Ideas I've had:

  • some kind of physical plastic covering that fits snugly around it. I'd probably do this if I had a 3d printer, but I don't. Maybe someone sells a thing like this? More just a reminder not to touch them.
  • Carefully paint the switches a different color (perhaps the HA color scheme?). Again, basically just a reminder. This especially makes sense with a few multi-switch plates where some of the connected lights are automated and some are intentionally left manual.
  • Entirely replace the plate with a smart switch? Besides incurring a nontrivial cost and being a bunch of work to install, this won't even help me with the aforementioned multiswitch plates. I don't want all my lights automated.

Other ideas?

you are viewing a single comment's thread
view the rest of the comments
[–] DeltaTangoLima@reddrefuge.com 2 points 2 years ago

The only wifi bulbs I have are in lights that don't need manual interaction, eg. floor lamps, bedside lamps, desk lamps, etc. Fixed lights get a Shelly relay behind the switch, so I can get the best of both worlds.