homeassistant

15186 readers

6 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Home Assistant + OpenWRT + Pi-Hole on a Raspberry Pi 4 (lemmy.ca)

submitted 2 years ago by alwaysconfused@lemmy.ca to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

My current setup is a TP-Link wireless extender. From that I have my own little network that connects my computer, wireless devices and a Raspberry Pi 4. The RPi4 runs the Home Assistant OS for my small network of lights and switches. The TP-Link extender does not have enough memory to support OpenWRT which means I am dependent on the proprietary android app to configure it.

I thought I could use the integrations in HA to add OpenWRT and Pi-Hole but it looks like those integrations are for communicating with instances and devices not within the HA operating system.

What I was hoping to accomplish was to run HA, OpenWRT and Pi-Hole on the same RPi4 device and re-use the TP-Link extender elsewhere in the house to serve ad-blocked internet that extends beyond my little network of devices.

Would running multiple services like this be too demanding for the RPi4? And if it is possible, where is a good place to start?

you are viewing a single comment's thread
view the rest of the comments

[–] alwaysconfused@lemmy.ca 2 points 2 years ago (1 children)

Fortunately the ISP provided modem/router has DNS support. I managed to install Adguard as an add-on in Ha OS. I just need to figure out why HA OS refuses to change my IPv4 address to static mode. After that I can change the DNS address and hopefully I can get rid of ads in my house.

[–] Lifebandit666@feddit.uk 2 points 2 years ago

Good news then! Try setting your IP in your router for your Pi, that should give it a static address if you can't set it on the pi