this post was submitted on 01 Jul 2023
10 points (100.0% liked)

homeassistant

15351 readers
5 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
10
Led controller for segmented led (lemmy.world)
submitted 2 years ago by Oliper202020@lemmy.world to c/homeassistant@lemmy.world
20 comments fedilink hide all child comments
 

So i bought a floor lamp, similer to the hue signe lamp, its segmented but i dont know if wled would be a good option for it or what controller would be a good option, it has 4 pins

you are viewing a single comment's thread
view the rest of the comments
[–] CmdrShepard@lemmy.one 1 points 2 years ago (1 children)

Addressable can be set to a single static color too. If you test it with different patterns, is it always 3 LEDs per color? If so that indicates they're possibly 12V WS2811 LEDs as they're only addressable every 3 LEDs.

[–] Oliper202020@lemmy.world 1 points 2 years ago (1 children)

I'm currently only using the led controller that came with the lamp, so its hard to test, as its just using one of those shitty remotes and some preset patterns, and yes I know, but from what I could tell it is just every 3 LEDs and it's late, might check tomorrow, I'm currently on vacation, i just saw the lamp, and bought it, and started thinking about how to make it smart

[–] CmdrShepard@lemmy.one 1 points 2 years ago (1 children)

Odds are it should work just fine with WLED. Feel free to post again or reply to my comment when you decide to tackle it.

[–] Oliper202020@lemmy.world 1 points 2 years ago

Okay thanks