homeassistant

15310 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Raspberry Pi 4 Home Assistant OS has no Internet during start up installation (lemmy.ca)

submitted 2 years ago by alwaysconfused@lemmy.ca to c/homeassistant@lemmy.world

3 comments fedilink hide all child comments

From the installation log, I get the follow message:

[supervisor.host.network] Requested to update interface end0 which does not exist or is disabled.

I've tried creating a CONFIG usb drive following the information here. Even with the appropriate wired connection config file I still get the same message.

I don't have a spare keyboard so I wouldn't be able to use the CLI to enable the ethernet. At this point I am not sure how else to approach this problem.

you are viewing a single comment's thread
view the rest of the comments

[–] alwaysconfused@lemmy.ca 1 points 2 years ago (1 children)

I've been running into issues with trying to post the log file data. There's something in there that causes the reply button to hang indefinitely.

This is the log file with the Config USB plugged in. This is the config settings I used.

For reference, This is the log file of the installation without the Config USB.