this post was submitted on 14 Jul 2023
12 points (92.9% liked)

homeassistant

15328 readers
23 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
12
alert when aqara temp sensors outside go above or below temp sensor inside (lemmy.world)
submitted 2 years ago by june@lemmy.world to c/homeassistant@lemmy.world
8 comments fedilink hide all child comments
 

Wondering if this is possible. A quick look through the automations and scenes didn’t pop anything out for me, but it would be nice to know when to open and close my windows throughout the summer based on actual local temp now that I’ve got a couple of the Aqara sensors outside.

The idea is that when the temp on both of the outdoor sensors goes below the temp on the inside sensor, in the afternoon/evening, I’d get an alert to open my windows.

And in the morning I’d like an alert to close my windows when the outside temp and inside temp are the same.

you are viewing a single comment's thread
view the rest of the comments
[–] Styxia@kbin.social 3 points 2 years ago* (last edited 2 years ago)

In isolation a temperature sensor can be “flappy”, so you may want to try and smooth the data to avoid hysteresis. I use the statistics integration to help improve the quality of my sensors.

Have a read of this for inspiration:
https://community.home-assistant.io/t/thermostat-with-hysteresis-smoothing-factor/72729

Using this you would create a calibrated sensor which you would use for automations as SeriousBug suggests.