Chozo

joined 2 years ago
[–] Chozo@fedia.io 15 points 4 weeks ago (1 children)

Maybe you forgot what community this is, chief.

[–] Chozo@fedia.io 24 points 4 weeks ago (1 children)

My kitchen faucet does this. It's a 2-axis lever. Y axis is the temperature adjustment, X axis is flow. As long as you leave it set to the same Y position when you turn it off and on, it'll be at the "last used combination".

[–] Chozo@fedia.io 7 points 4 weeks ago (6 children)

It's a ton of fun. Honestly, I suggest you play it the way I did as a kid, and bring out a bunch of paper and pencils and start drawing your own maps by hand. There's something magical about that process, imo.

[–] Chozo@fedia.io 30 points 4 weeks ago (1 children)

Yeah, at best it's "A framework for Red Alert 2 in web browser".

[–] Chozo@fedia.io 18 points 4 weeks ago

How does one even accidentally steal a texture someone else made?

One could easily apply Hanlon's Razor to this. For example:

  • Bob is a game artist. Bob has a folder on his desktop called "Inspirations", where he saves art pieces he finds online that he likes, and a folder called "Assets" where he saves things he's created for the game. Bob transfers to a new department in the studio, or quits, or is fired; either way, he returns his equipment to the IT office.
  • Dave is an IT guy at the studio. Dave takes Bob's computer after he leaves the job, and transfers all of Bob's files to the studio's shared drive. Dave isn't an art guy, and doesn't know the difference between "Inspirations" and "Assets", and dumps them all into the shared drive in a folder called "Bob's Things".
  • John is the studio's new artist, replacing Bob. John syncs "Bob's Things" to his computer. John assumes everything in this folder has already been cleared for use by Legal. John starts implementing the art into the game.

I used to be a pretty hardcore Destiny 2 player for several years. In that time, I've seen Bungie fuck up a lot of things. But those fuck-ups were almost entirely caused by somebody in the studio not playing close-enough attention to something, and details getting mixed up in the pipeline. I don't think anybody at Bungie knowingly put Antireal's art into the game. I think the more likely explanation is that there was a lack of oversight, and files that shouldn't have been mixed together, got mixed together.

It wouldn't even be the first time Bungie had something like this happen; there was an instance where a third-party studio that Bungie contracted to build a Destiny 2 cut-scene accidentally used artwork that was not intended to be in the actual cut-scene.

Not to suggest that any of this excuses Bungie for multiple cases of plagiarism. Obviously, they need to have stricter standards in place when transferring files between parties. It's a colossal fuck-up, but I don't think that it was a fuck-up anybody set out to commit.

[–] Chozo@fedia.io 9 points 1 month ago

Chang’e-6 samples contain iron oxides, previously thought to be absent from moon, which may have been generated by impacts, scientists say

[–] Chozo@fedia.io 1 points 1 month ago

We had mostly 8s, but somehow a few 4s got added in. Here I am now, 30-ish years later, and my roommate has 4s in her kitchen, too.

[–] Chozo@fedia.io 12 points 1 month ago

Holy shit it just gets better and better.

[–] Chozo@fedia.io 4 points 1 month ago (1 children)

I've got bad news for you; those may have been sharts.

[–] Chozo@fedia.io 7 points 1 month ago

I used to work as a PQI contractor at Nest, and we actually had test setups like this in the office that were just a circuit breadboard mounted on a plate behind the thermostat. The thermostat doesn't really "communicate" with the HVAC control system at all (all it does is just send ~3V along the circuits based on its current mode), so as long as you have the circuits routed properly on your board, the thermostat will think it's connected to a real system.

The stock firmware doesn't let you go above a certain temp (like 80F or something, I forget the exact limit). But if your custom firmware allows it, the only thing that would realistically happen is that it just runs a 3V circuit to what it thinks is the heater, infinitely, since nothing is actually causing the ambient temperature to raise at all. The ambient temp reading comes from a sensor on the thermostat, itself.

[–] Chozo@fedia.io 7 points 1 month ago (1 children)

"Having" is not the same as "owning".

[–] Chozo@fedia.io 6 points 1 month ago (10 children)

But we don’t actually have ownership rights any more, do we?

When it comes to video games, we've never had ownership rights. Buying a game has always been just buying a license. The only thing that's changed is that now publishers have a mechanism with which to enforce it.

 

This message will repeat until there are none left to read it

 

😇👋A MONTH OF NO GODS🧳⛩️

There is a quaint belief that in the 10th month the gods of Japan congregate for a great gathering to discuss matchmaking at Izumo-taisha (出雲大社) in Shimane Prefecture.

Only hard-of-hearing Ebisu and the Sun Goddess miss this annual pilgrimage.

Further reading:

In the tenth month of the traditional lunar calendar, a festival is held to welcome all the gods to Izumo Grand Shrine. It is believed that the gods convene at Izumo Shrine in October to discuss the coming year's marriages, deaths, and births. For this reason, people around the Izumo area call October kamiarizuki ("the month with gods"), but the rest of Japan calls October Kannazuki ("the month without gods").

https://en.wikipedia.org/wiki/Izumo-taisha

@camelliakyoto is a great account to follow on Mastodon for historical Japanese culture.

 

I hope we're in agreement that Heilung falls under the metal genre.

 

Hey, was wondering if anybody might have any tips for me! I've been using a Worksharp Knife & Tool Sharpener MK2, and have this weird issue where my knives are coming out sharper on one side than the other.

I know that shouldn't really make any sense, but I've got a knife right now that I have no problem shaving hairs off my arm with, but only with one side. If I flip it over, no matter what angle I approach with, I can't knock away a single hair. The bevel is also significantly wider on one side, which I also can't figure out how to correct but I'm sure is related.

I can't tell if this has anything to do with the fact that the belt rubs against the steel in different directions when sharpening each side (up and into the blade on the left side, down and away from the blade on the right), or if perhaps this might be an error in technique on my part. As far as I can tell, I'm keeping the blade in line with the guides properly and not deviating significantly.

For what it's worth, I'm working with a hawkbill blade. Meaning that I have to lower the knife as I draw it through the sharpener, to keep contact with the belt. I know this allows for a lot of room for error; I've been making an effort to ensure that I'm keeping the alignment correct the whole time, but it's wholly possible that this may be where I'm messing something up.

Any ideas if I might be doing something wrong or something I could try to get a more even edge on both sides?

 

Just stop it, It's annoying. Use your hands for something else. I'm not looking for a fight. Just bringing you the truth.

4
yeule - ghosts (www.youtube.com)
 

Valve has updated the Steam Subscriber Agreement. The updates affect your legal rights, including how disputes and claims between you and Valve are resolved. Among other things, the new dispute resolution provisions in Section 10 require that all disputes and claims proceed in court and not in arbitration. Please review carefully.

For comparison, here is a Wayback Machine snapshot from yesterday: https://web.archive.org/web/20240925000911/https://store.steampowered.com/subscriber_agreement/

 

This 16 year old video randomly showed up in my recommendations tonight. This is one of the coolest juggling routines I've ever seen.

 

Hey guys! I've just recently gotten into collecting pocket knives, and I wanna make sure I'm taking proper care of them. My last two purchases have been karambits, both with fairly steep recurved blades, whose edges I'd like to be able to maintain.

I know that normal sharpening stones aren't going to allow me enough contact with the blade to actually put an edge on it, so I've picked up a Smith's DRET sharpener and have been practicing on an old dull knife with a stiletto blade, just to try to get some basics down. I'm getting better with it, but I'm struggling to get an even, consistent edge. Even without any special optics, I can see with my own eyes that I've got wildly uneven angles.

Granted, I'm practicing with a very low-quality knife that was already in pretty rough shape. I've managed to get the edge from "literally unable to break the skin with 20 pounds of pressure and aggressive sawing motions on my forearm" to "can cut through paper with about half of the blade before bunching up", though it's come at a cost of scratching the absolute hell out of the rest of the blade (which is just me being sloppy).

I figure that once I'm able to get competent enough with sharpening a normal blade shape that I'll move on to testing with a donor karambit. I picked up a super cheap, mall-ninja-ass karambit on Amazon because the reviews were all poor and said that the knife arrived completely dull, so I figured this would be perfect to practice sharpening. Unfortunately, it arrived with a surprisingly sharp edge, so I'm gonna have to abuse this knife for a bit before I can even practice anything on it.

Just curious what sort of tools y'all recommend for dealing with recurved blades, or any techniques I could try to incorporate into my practicing. Thanks!

 

Hey guys! This might be a bit of a longshot since I don't think this knife is too popular, so I don't expect a lot of people to have experience with it. I recently purchased a Reate Exo-K, and I absolutely love it. It's in no way a practical or useful knife, it's dangerous to the user and its own self, and it's illegal to carry in a lot of places. But it's fun, and that's what matters to me.

I often will idly flip the knife open and closed while working, and from the beginning there was always a little amount of rattle when deploying it. After having it for about a week or so, it feels like all the pivot points have gotten a bit looser, which I think is to be expected after breaking it in a little.

But now it's beginning to feel like there's more play going side-to-side with the arm, causing more rattle than before. While held in the normal reverse grip, it tightens right back up and there's virtually no play, so I'm not worried about it falling apart on me while I'm actually trying to cut something with it, but I'm worried that the arm may come apart somehow during deployment. Since a flipping motion is required to open this, I worry that I may end up launching a razor sharp blade in a random direction at considerable speed, which... isn't good.

For what it's worth, this is how much space I'm getting between the arm and the handle when in the open position. That much space exists while the lock is engaged. I'm not sure if this is typical for the Exo-K, or if this is an excessive gap.

Compared to the trainer, there's a significantly larger gap and louder rattle. But they're made from very different materials, so I won't know how much I can reliably compare the two.

Just curious to know if anyone else has had this happen with theirs and is normal, or if I should reach out to Reate for a warranty claim.

view more: ‹ prev next ›