hit_the_rails

joined 1 year ago
[–] hit_the_rails@reddthat.com 1 points 15 hours ago

We do have 15, 20, and 25A sockets, but these (especially the latter two) are quite uncommon (in the home) and most appliances which require more than 10A are hardwired on dedicated circuits such as for ovens, cooktops and ranges. Our typical clothes dryers just plug in though, with hardwired mainly found in laundromats and other commercial spaces.

[–] hit_the_rails@reddthat.com 6 points 2 days ago (2 children)

I've always found this fascinating about Canada and the US. Both legs are +/- 120V potential to ground, and 240V between them. Here in Australia, everything in my house is 230V between active(hot) and neutral, both for plug in appliances and hard wired stuff like my heat pump (We call it a reverse cycle air conditioner here). Almost every house I've ever lived in has had one.

My old resistive clothes dryer just plugged into a standard 10A outlet like everything else. My current heat pump dryer uses 1/5 the energy though and has already paid for the extra purchase cost over the past three years.

[–] hit_the_rails@reddthat.com 9 points 1 week ago (1 children)

B e a n s 🐾

[–] hit_the_rails@reddthat.com 14 points 2 weeks ago (2 children)

I'm in this photo and I don't like it

[–] hit_the_rails@reddthat.com 6 points 1 month ago

Lemmy as a whole is a community of people who choose it as a nice place to spend time.

Just participate. Or don't. Either is fine.

If you do, be kind. Plenty of people here seeking positive interaction and discussion.

If you don't, make sure you at least up/downvote stuff. It still contributes to this amazing community.

Either way, you are welcome here.

[–] hit_the_rails@reddthat.com 19 points 1 month ago (1 children)

Big purchases must happen on big screen.

 

cross-posted from: https://reddthat.com/post/39309359

I've been running Home Assistant for three years. It's port forwarded on default port 8123 via a reverse proxy in a dedicated VM serving it over HTTPS and is accessible over ipv4 and ipv6. All user accounts have MFA enabled.

I see a notification every time there's a failed login attempt, but every single one is either me or someone in my house. I've never seen a notification for any other attempts from the internet. Not a single one.

Is this normal? Or am I missing something? I expected it to be hammered with random failed logins.

 

I've been running Home Assistant for three years. It's port forwarded on default port 8123 via a reverse proxy in a dedicated VM serving it over HTTPS and is accessible over ipv4 and ipv6. All user accounts have MFA enabled.

I see a notification every time there's a failed login attempt, but every single one is either me or someone in my house. I've never seen a notification for any other attempts from the internet. Not a single one.

Is this normal? Or am I missing something? I expected it to be hammered with random failed logins.

[–] hit_the_rails@reddthat.com 41 points 1 month ago (4 children)

I use Arch btw

[–] hit_the_rails@reddthat.com 2 points 1 month ago (1 children)

Yes but you could be compelled to decrypt devices, and detained for failing to do so

[–] hit_the_rails@reddthat.com 97 points 1 month ago (6 children)

Buy some non US-based cloud storage and copy all your sensitive data to it, and delete said data from personal devices before leaving the country, so you can safely allow customs access to devices if required.

Retrieve data from the cloud when you arrive in the destination country.

[–] hit_the_rails@reddthat.com 7 points 1 month ago (1 children)

Please tell me this isn't what I think it is 👀

[–] hit_the_rails@reddthat.com 4 points 2 months ago

Great advice. Here's hoping the LTSC market share and user base noticeably increase once Win10 is no longer supported.

view more: next ›