@D45 @flashlight I always carry my 3000 k brass TS10 in my pants pocket. I almost always carry my backpack with me and there are three more light coming with it : one 519A 4500 k DD (so more 3500 k) modded MT21C on the strap, one spare silver TS10 4000 k clipped at the top of the main compartment to light the inside, and one MAO 4000 k HD10 for FOH work in theatres.
@Schlemmy @Lurkinney Isn't there an option to disable the voltage flashing? I recall something like that.
@flashlight for those asking why I'm not on the pictures, working with the others, I was going back and forth from the stage with equipment, because the stage and backstage are 1,10m above the floor, and van, with no elevator or stairs nearby :D
3000 K BraTS10 and 4500 K DD MT21C lighting up the inside of a van while loading up the theater set and equipment.
The van was otherwise not lit at all on the inside. @flashlight #flashlight #theater
@cobysev @GraniteM I have a french version from 1942 and modded it with a pretty low power, 2700~3000 K single LED drop-in, and more importantly a 18650 battery with integrated USB charging. I built a cheap 2D-18650 adapter by hollowing a piece of wood from the bottom and putting a flat-cut screw through the top to make contact. My grandpa use it and is happy with it. Way more runtime, bit more light, same temp.
@mp3 my little sister (21) just now: "I want that!"
Thanks, I now have an excuse to buy them :D
(And 519A-mod them before gifting them)
I'm officially the flashlight guy of the family, according to this present 😭
#flashlight @flashlight
Je suis prêt pour le 8 décembre.
Hi! Do you know where to find floody TIR optics to put in my 519A modded MT21C? (~1 inch diameter) @flashlight #Flashlight
Today I swapped the awful and greenish factory Cree XP-L HD V6 6500K of a Nitecore MT21C for a Nichia 519A 4500K (MCPCB swap). I may try to install a floodier TIR optic. Click the fedi logo for more! #Flashlight @flashlight
Two vise clamps and lots of brute force, I finally disassembled the head of a MT21C, which is a great light with shitty emitter and beam. What emitter should I swap for ? 3.45mm square, 2.79 Vf typical, 3 amps. I like 4000 k and high CRI. @flashlight
3000k TS10 to the rescue! Nobody planned any lighting for the sculpture ( by @Syl) at the entrance of the festival. It is fixed for a few hours. @flashlight
[OC] Hi ! I live near Lyon, France and this is a map from only my GPS traces from the last 4 years. #map @dataisbeautiful
Comparing the 3D beam shapes (and not a side projection on a wall) of the 1 LED + SMO Nitecore MT21C vs the 3 LED + TIR optics of Wurkkos TS10s (4000 K and 3000 K). Using soapy water in a white tub. @flashlight #flashlight
@zakreviews @flashlight LED : Yes