node815

I know it was available in KDE 4 and 5 and haven't seen it updated for 6 which I understand. It has come in handy to organize some of the more important folders for myself and family like this:

My question is, is there a different way of assigning folder colors without the plugin? I imagine a custom icon, but I admit, right clicking and choosing the tint made it dead simple! :)

Since we were one of the last generations to not grow up with tablets, cell phones and Internet to keep us self occupied and absorbed, we always played outside and sometimes would get hurt badly. I can recall three of these times involving a bicycle.

My first one was when I was 10 yrs old on the way to school down the street (straight shot) riding my trusty BMX bike and being mesmerized at the time at how my legs were powering the bike. Right about that time, I remember standing there, looking at my wheel and it was spinning, and some guy ran up to me to see if I was okay. I told him I was and went to the school and to the school office as the guy was very concerned. I ended up with quite a gnarly goose egg from slamming my bicycle into the back of a parked car!

My second one was on the same bike and I built a fun ramp to jump my bike off of on the sidewalk and was having a great time doing so until I somehow landed the wrong way and tore my right muscle in my neck. A trip to the ER later, I was home and back to doing things maybe a week later.

My third and final time, I was 14 and on this really awesome for the time, 10-speed with a black frame with red trim including the cables and seat. It was glorious! I was enjoying my time riding it at the top speed I could and didn't negotiate a turn correctly and ran into a curb and flipped off the bike and landed hands down to the ground. I bent my right arm some and had a 'splinter fracture'. That trip to the ER resulted in a splint which led to the orthopedic doctor who gave me a wrist brace they use for surgeries and I guess Carpal Tunnel. I had to wear that for 8 weeks and it was a long hot summer!

We played in the streets, we rode our bicycles, came home when the street lights came on and well, you know the rest of the story. :) I was 12 when the first ever home computer invaded my home and I was hooked! It was a Tandy Radio Shack Color Computer II with a Tape drive and joystick. It was fantastic! My favorite game on there was a text adventure titled "Bedlam" in which you escape a mental institution. (https://www.figmentfly.com/bedlam/)

My first ever modem was a 300baud modem. I ran up a $200+ phone bill in long distance charges when I was able to magically find all this wonderful software for my computer. I remember being a teenager when AOL was staring to be popular and I used GENIE from General Electric for their WWW Multi user BBS. (I still remember my username, xky06729,publish (Second part was my assigned password) I also ran a few BBS's on Atari 8-bit computers and Atari ST computers. I was rockin' the 1200baud modem and remember the time when I hooked up a brand new out of the box 14,400baud modem. I was speeding along until about 45 minutes later and someone let the magic smoke come out! I was in high school when a fellow student bragged about getting online in AOL ('91-'92) and sat amazed listening to his stories. I still remember the dial up sound especially on the 56k modems with error correction.

I was in my early 20's when I first got my "Always on" internet connection from the cable company and it's never been the same! I have two grand kids which I plan on boring with my stories of the time before the Internet and how much better life was when they get a little bit older. (one's 2 and the other is 6).

Anyone else grow up playing on your home computer which hooked to the TV?

Let me be clear, I'm absolutely NOT promoting this brand, company or otherwise, and I am also not receiving payment or gratis products.

I have been fighting Tuya lights for some time (Costco Feit branded color bulbs). I had picked them up at something like $5/each there in a 4 pack and overall have been happy with them. This started to change about a few months ago, it seemed that they would lose their pairing with Tuya's servers in China and would randomly and usually just when I needed them the most, become unavailable. I had placed all 4 of them in the apartment, 3 in the living room and one in the bedroom. The one where I felt it the most - the bedroom. 5 minutes before I retire for the evening, it's set to turn on the light, and then after 30 minutes, if I haven't already, turns it off. I also have the living room lights programmed to turn on during certain times of the day and off using the Simple Scheduler plugin (I highly recommend it!)

Fast forward to last week, I was sick and tired of the random connectivity issues so I went on the hunt and settled with a pack 6 Matter color bulbs and jumped at the chance. So, I bought them, and they arrived today. I can honestly tell you, that there was absolutely NO problem paring them to Home Assistant and the color control is amazingly accurate! The comfort of knowing that I shouldn't have to worry about losing my light connectivity is priceless now. :) If anyone is curious, this is the brand and so far I can say they are simply amazing!

https://www.amazon.com/dp/B0BLTWFJWY?psc=1

About Tuya and Tuya Local

I'm not totally abandoning Tuya itself, but the goal is to eventually be independent from their devices. Right now, I have a dehumidifier and all of my old lights and a massively long 400 light string light all connected via Tuya. The bulbs, will probably be stored as a "backup" or filed away for use in non-essential areas where connectivity is not as important.

Tuya Local is an amazing and awesome option, which completely lets you control your devices locally and I use that on the dehumidifer. I also had the old bulbs on there as well. The string lights, I tried, but it's a major process of learning what 'DP' Codes correspond to what color you want. I just left those paired to the cloud as Tuya provided the necessary mapping.

You may ask why then, if I had them on Tuya Local, why didn't I just use that to control my lights? The answer lies within the process of obtaining the local key from Tuya. If anyone who has done this knows, Tuya loves to change up their site's navigation and settings and it's seemingly random when they do. I finally got smart though and mapped out the device ID and the super secret and important "Local Key" and recorded those in Joplin. I lived with them like this for a couple of years, but I started to encounter random "crashing" of the lights if you will, where they would go offline and in spite of switching to Tuya Cloud (I have the app on my phone), they would refuse to become available, so I had to factory reset the bulbs to the ever familiar blinking lights process. What I didn't realize at the time, but I later did, when you reset the lights, the local key also resets to a new one. There was a time too, where more recently and was my final decision when within a 72 hour period, I had to reset a light three times.

Matter

It's encouraging to finally be able to use the Matter integration in Home Assistant, it's justifiably flagged as (Beta). Simply put, there is a slight delay from when you trigger the light before it turns on or reacts. This really isn't a big deal for us though. Additionally, I was able to add these to Google Home effortlessly which also makes them Wife Approved. :) The lights do not have a delay there, also, the app they want you to use experiences no delay.

Overall, for my first experience with the Matter devices, I was simply amazed at how easy it was to connect. I discovered that Home Assistant asks you to use the phone app to scan the QR code on the box (The bulb in this case) to obtain the pairing code and it seamlessly integrated it. My phone is a Pixel 8a which has Android 15 on it and before I even got to Home Assistant, it was asking me to scan the QR Code for matter setup.

**Light Quality and impressions

I will say these are pretty bright and not blindly so, but they are plenty bright. :) They have great color to them and the color temperature is awesomely simple. Ours are set to a nice 4000k.

Construction of the bulbs feel to be of decent quality. At least with Amazon, where I bought these, finding locally controlled bulbs was not too easy, and this brand (OREIN) was the only seller which sold Matter devices. If you are looking for a supported Matter light bulb, this may be what you need. :)

Instead of a less than useful search engine.

I've noticed that when 6.6.1 came out and it came time to reboot after it installed, I couldn't boot into the OS anymore, it simply hangs on a black screen for about 10-15 minutes then reboots after selecting it. I'm currently on the LTS kernel which is 6.1.67-1-lts (64-bit) with no issues. I figured after updating to the latest one 6.6.6. things may be better but no. Each new kernel release, I test it with the same results.

CPU is CPU: quad core Intel Core i7-2600S (-MT MCP-) on Dell Optiplex 990 SFF PC with 16GB Ram in UEFI mode. Via either Grub or Systemd-boot. On one hand, I'm thinking that my computer's time may have finally come up once the LTS moves to 6.6.1 but, until then, and I can procure a newer system, I'd like to see if anyone else has encountered such a thing.

Someone here brought up that they were able to replace Cloudflare Tunnels with Tailscale - I can't seem to find the post, as it was a comment and deeply buried in a thread I've since forgotten the title of. :)

Can anyone explain the process for doing this? I assume it's through the use of their Funnel? I have three primary services I require to be accessible through Authentik (that's one of them) via my domain name.

EDIT

To answer the question of why I want to leave Cloudflare Tunnels - is basically that I have several services behind it (I forgot one so make that 4 I wish to have exposed). Two password managers, Psono for my special needs daughter which finds it easier than Bitwarden and Vaultwarden for myself and my work logins. So, I can't just set up a VPN or Tailscale at work to connect my work passwords to. :) I also have Authentik and Home Assistant tunneled at present. That doesn't explain the reason why though so let me start here:

My step-daughter is learning video production and editing, we don't want to share her videos on Youtube or other sites, but would like to keep it more local to home. With that said, Cloudflare may not notice it at first, bit it's against their TOS to stream videos, not to mention their just over 100mb cap for file xfers which leads me to the next reason. Early in May of this year, we were in an auto accident, and we are frequently sending forms, accident photos and paperwork etc to the Attorneys, I want to have control of the ownership of the files and would prefer not to email them, but link them to my server, frequently, those files even zipped can be over 100mb.

I do have a private DDNS provider I have my domain CNAME pointed to so it resolves to the home IP that way, so the ultimate plan is to untie my site from Cloudflare's DNS to a offload to a VPS or two for (NS1 and NS2) With a recent issue with Oracle Cloud, I'm not motivated to use them for this basic purpose.

And just a small part of me is starting to get tin hat against the idea that Cloudflare can decrypt the data before it hits my site before it encrypts it. Just just isn't sitting well with me at the moment. I can't verify this data yet, but I like to play it safe than sorry.

EDIT 2

So, I ran a funnel test and yes it works, but still have to use the ts.net like others said, so at best, I can figure this to be a good backup service. I can't forward a CNAME to my TS DNS. I checked /r/tailscale (Duckduckgo sent me there), and about a month ago, someone asked if you could use your own domain, the answer was "not yet" but there seems to be some interest.

What I found pretty fascinating is the mobile app does work quite well on Android and is so far so good, I can at least feel better knowing that the phones are on WG full time now through Tailscale. I had issues with the official WG client and another one staying on with our phones full time, so this so far has been a good improvement.

Let me preface this with I was reinstalling my Arch system when Linux 6.6.1 killed the computer's boot cycle. (Dell Optiplex 990 i7) system. Anyway, I needed to get this back up and running and since I couldn't even get it to boot, I did a reinstall relying on my backups and on the Linux LTS for now. I am an early adopter with software and wanted to modify my repo to use the KDE-Unstable branch. To my surprise, upon rebooting after running an update, I was looking at the shiny new KDE 6 desktop! I was thinking maybe just a newer point release.

The Good

It looks surprisingly nice! You can certainly tell that a lot of work has been put into this version.
The new Dolphin interface is looking quite awesome! Nate Graham on his site details the changes, but it looks and feels more cohesive and unified across the board.

I had a crash while browsing SDDM screens in their system settings, by canceling it and it killed it, but the reporting system for the failure seemed to be extra fluid and submitted it without much input from my end. Nice Touch!

Interestingly enough

They have done some major work on the system settings and I think this will take some training of muscle learning from KDE Plasma 5. It seems a bit more logical if you will. And the change from single click to double click by default is a huge bonus for me. The KDE version number indicated something around 5.27.11 (If I remember correctly), so it isn't quite 6 , but I expect that to change once the desktop is finalized in Feb 2024.

The Bad

It's feature incomplete, If you need to change your desktop wallpaper, the option to right click in discover on the picture to set it is no longer there.
The sound settings, and other functions listed in Nate's blog just don't exist in the build I tried, but I respect that with it being Alpha.

The Ugly

This will probably apply to Arch only, but if you update it through KDE-UNSTABLE's repo in Arch, there is no way that I could find to fully remove it and reinstall it easily even by using the sudo pacman -Syuu command. So, be forewarned.

Disclaimer

Yes, I know, this is Alpha and not meant for daily use. I never intended for it to be installed through their unstable repo, but lesson learned. :) I'm glad I was able to take a glimpse at it and I now feel confident in knowing that on my 12 yr old machine, it ran nice and fluid and smoothly. It can only get better from there!

For now, I'll for sure stick with deploying it in a VM for further testing. :)

Invariably, when I try to install themes, or anything from Plasma's menu's I get the following error, If I'm lucky, I get get a few pages in, other times it's right off the bat like this time. Is this due to an overwhelming of the servers or something else?

Prerequisites

• Costco Feit Color Bulb :)
• Tuya Local API Key (Online has some good resources to obtain that)
• Tuya Local plugin via the HACS store.

The Seemingly impossible to find settings

I struggled with this for a good while and believe I came up with the correct settings when adding this in Tuya Local, below are my notes:

Tuya Local Settings for the bulbs:

• Brightness 3
• Color Temp 3
• Brightness Lower Value: 23
• Brightness Upper Value 255
• Color Mode 2
• Color 2
• Minimum Color Temp in K 2700
• Maximum Color Temp in K 6500
• Color Temp Reverse Unchecked
• Scene 1
• Music Mode Available Unchecked

Using the above settings, we have near accurate color and control of the bulbs. I'm aware that some firmware may change this as I had one new bulb I put in not match the color settings until I updated it to the most current at the time I took these notes (about 6 months ago). But I think and hope that if you are struggling with getting these to work with Home Assistant, this will help!

While using KDE Wayland latest version, Flatpak apps always want to display an alert letting me know that the application is running in the background until I dismiss it. Is there a way to disable this? (Using Arch BTW)

With X11, it works without issue.

As I've gotten older, I find myself doing the old ughs and groan while getting off the couch or say things to my kids that my parents told me. I also truly appreciate the coveted chair or spot on the couch which is "Dad's Spot!"