(still no DAC support)

Release Notes

• OS
  • Fixed Single-buffered Sync Mode being forgotten on power off
• System
  • Added several missing HuCards to the Library
  • Fixed timing compatibility bug affecting some official and unofficial HuCards
  • Fixed reset bug on unofficial HuCards
• Controller
  • Added support for Switch Genesis/MD controllers
  • Added support for Switch NES/Famicom controllers
  • Added support for Buffalo Classic USB Gamepad
  • Added support for some later Wii Remote Plus controllers
  • Fixed button mapping for Switch Joy-Cons and Switch SNES/N64 controllers
  • Fixed various 8BitDo controllers when connected via USB: M30 2.4g, N30 2.4g, SN30 2.4g, Zero 2, and Micro
  • Fixed PS4 controller home button bug when connected via USB
  • Fixed occasional crash when attempting to pair controllers
  • Fixed reconnecting/pairing of Bluetooth LE controllers that had been paired to other devices

[Link to original announcement Tweet]

Reminder about Controlling the Menu

• For controllers without a menu button such as the SN30:
  • The menu can be opened by pressing Select + Down (hold Select first)
  • Original Display Modes can be cycled through using Select + Down + Left/Right (hold Select first then Down)
  • Save States can be created by pressing Up + Select (hold Up first)
  • Save States can be Quick Loaded by (enable in menu) pressing Down + Select (hold Down first)

Analogue 3D Shipping Delayed to July 2025, Pocket White Restock, PocketOS and DuoOS Firmware Updates

• Analogue 3D shipping has been delayed to July 2025.
• Analogue Pocket [white] is back in stock and shipping. Analogue Pocket [black] and all accessories are in stock and shipping too.
• PocketOS v2.5 and DuoOS v1.5 firmware released.

[Link to original announcement Tweet]

(still no DAC support)

Release Notes

• GB, GBC
  • Fixed a bug with the backup save export that is generated when making Save States
• TG16
  • Added several missing Hucards to the Library
  • Fixed timing compatibility bug affecting some official and unofficial Hucards
  • Fixed reset bug on unofficial Hucards
• Nanoloop
  • Fixed ghost note playback
• Dock
  • Added support for Switch Genesis/MD controllers
  • Added support for Switch NES/Famicom controllers
  • Added support for Buffalo Classic USB Gamepad
  • Added support for some later Wii Remote Plus controllers
  • Fixed button mapping for Switch Joy-Cons and Switch SNES/N64 controllers
  • Fixed various 8BitDo controllers when connected via USB: M30 2.4g, N30 2.4g, SN30 2.4g, Zero 2, and Micro
  • Fixed PS4 controller home button bug when connected via USB
  • Fixed occasional crash when attempting to pair controllers
  • Fixed reconnecting/pairing of Bluetooth LE controllers that had been paired to other devices

[Link to original announcement Tweet]

Reminder about Controlling the Menu

• For controllers without a menu button such as the SN30:
  • The menu can be opened by pressing Select + Down (hold Select first)
  • Original Display Modes can be cycled through using Select + Down + Left/Right (hold Select first then Down)
  • Save States can be created by pressing Up + Select (hold Up first)
  • Save States can be Quick Loaded by (enable in menu) pressing Down + Select (hold Down first)

Hello,

Just so everyone knows, it appears that maybe the latest EverDrive N8 Pro firmware (NES edition, Famicom edition), version 2.15, could have some compatibility issues with the Nt mini Noir.

You can see some more discussion around this from these two RetroRGB Q&A videos:

• Episode #338 at 28m18s
• Episode #339 at 2m22s

I'm not sure if there is any solution yet for this, or if this person might've found a solution themself 🤔 But I wanted to make sure attention is raised for this just so that people are aware.

I have an N8 Pro and an Nt mini Noir, but I haven't tried this new firmware yet, so I can't really report my own findings 😅

It's really hard to see on the website itself 🙄 but here is the direct quote:

Analogue3D is compatible with HDMI TV's, it is not compatible with CRTs or Analogue DAC.

(still no DAC support)

Release Notes

• OS
  • Fixed Library thumbnail generation

(still no DAC support)

Release Notes

• GG
  • Fixed GG rotated button mapping
• openFPGA
  • (Beta) Controller remapping now applies to all four controllers when Docked. This is a beta feature.

Store is offline right now, but should go online again at 8am PDT

https://store.analogue.co/

Time zone conversion: https://www.timeanddate.com/worldclock/converter.html

Hey everyone,

As you may know, Analogue has traditionally always had annual mid October announcements. Mostly following along with this reddit post, their timeline has been:

• October 16th, 2023: Analogue 3D announced
• October 16th, 2022: Pocket preorders, Pocket cartridge adapters, and final run of the Super Nt and Mega Sg announced
• October 16th, 2021: Analogue OS announced
• October 16th, 2020: Duo announced
• October 16th, 2019: Pocket announced
• October 16th, 2018: Mega Sg announced
• October 16th, 2017: Super Nt announced

I'm hoping to see some more news/information about the Analogue 3D, along with Pocket DAC support... 🥴

(This was also posted on r/analogueinc.)

Hello,

I've suddenly found that I can no longer use my Everdrive N8 Pro at all. It appears that my console, an Nt mini Noir, can no longer boot up at all when this cartridge is connected. I run through it a bit more in this video I just took: https://www.youtube.com/watch?v=G0%5C_gRNZsyOY

But basically, here is a full rundown of the issue:

• If I have my Everdrive N8 Pro plugged in to my Nt mini Noir, then my console will not boot up
• If I have my Nt mini Noir in any other configuration, then my console will boot up

Steps I've tried so far that have had no effect:

• Replacing the cartridge battery
• Cleaning the cartridge's contacts
• Cleaning the Nt mini's cartridge contacts
• Another micro SD card
• No SD card

Other misc details:

• My Nt mini Noir console is running the latest jailbreak firmware (v6.7)
• My Everdrive N8 Pro is running its latest firmware (v2.15)
• I purchased this N8 Pro from everdrive.me in August 2020
• I have not changed any settings or gear of any kind for a very long time, so this is not a result of recent settings changes or hardware changes
• Up until very recently, this N8 Pro had been working, although it was always somewhat flaky. And what I mean by "flaky" is:
  • The console would turn on normally, but then when I go to run the cartridge, I would get just a blank/black screen
  • The console would turn on normally, and would even load the Everdrive menu correctly. But the menu would have graphics errors, such as a broken/corrupt launcher menu
  • If either of the above issues occurred, I would just turn on console off => on again until it was fixed
• I unfortunately do not have a Famicom or NES to test this cartridge against those consoles. However, sometime soon I might be able to visit a friend who does, and then I can test my N8 again there

Does anyone have any thoughts? Unfortunately, it looks like my cartridge is outside of the warranty period now :(

Thank you!

(I have also posted this on r/everdrive and r/analogueinc.)

Still no DAC support...

Link to announcement Tweet

Release Notes

• OS
  • Added Sleep/Wake for NGP and NGPC
• GB, GBC
  • Added support for analog audio via cartridge pin
  • Added new Display Mode: Vacuum Fluorescent
  • Fixed irregularity with GB Original Display Modes
  • Fixed minor bug affecting GB and GBC Save States
• GBA
  • Fixed Sleep/Wake bug affecting some revisions of Pokemon FireRed, LeafGreen, Super Mario Advance 4 and a few other games
  • Fixed Memories save data backup not working on cartridges with special hardware
• SMS
  • Fixed Memories not showing in list when using SMS adapter
• NGP, NGPC
  • Fixed various game startup bugs
  • Fixed various video rendering bugs
  • Fixed video alignment when docked at 720p
• TG16, PCE
  • Fixed issues with composite palette
  • External HuCard audio is now off by default
• Lynx
  • Fixed screen flipping bug
  • Fixed rotation on launch bug
  • Fixed bug affecting Alpine Games
  • Improved booting on some homebrew carts
  • Improved Save States support
• openFPGA
  • Added support for the following Original Display Modes: NGP, NGPC, TG16, Lynx
  • Core Settings>Reset to Defaults now properly erases browser history
• APF
  • Fixed data slot sizes not being updated after a Target command [0192 Open new file]

💰😩