Buildapc

4438 readers

5 users here now

founded 2 years ago

MODERATORS

i had this idea of individually sleeving my cables, but then i found this when i cut off the existing heatshrink. (infosec.pub)

submitted 3 months ago by CrowAirbrush@lemmy.world to c/buildapc@lemmy.world

12 comments fedilink hide all child comments

The main idea i had was to individually sleeve these and potentially remove the split part as i don't like the idea of buying extensions and stuff even more cable inside my case.

On the other hand i would be ok with removing the combined sleeve and 3d print some combs to make the cables look better, especially since the mobo cable has a huge piece of heatshrink making it nearly impossible to look good.

But i have no clue what that little component is and if it only exists for the split that is in the cable.

you are viewing a single comment's thread
view the rest of the comments

[–] cryptiod137@lemmy.world 8 points 3 months ago (1 children)

Looks like a capacitor, can we get a pick of the top?

It's most likely it's to smooth out voltage from the power supply.

[–] CrowAirbrush@lemmy.world 2 points 3 months ago

It says: "FP 15Cd 331 16" on it.