this post was submitted on 18 Apr 2025
8 points (83.3% liked)

bike wrench

995 readers
1 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

!bicycles@lemmy.ca

!micromobility@lemmy.world

founded 2 years ago
MODERATORS
j4k3@lemmy.world
8
why aren't there any 2x5 groupsets? (slrpnk.net)
submitted 2 months ago by vomitaur@slrpnk.net to c/bikewrench@lemmy.world
15 comments fedilink hide all child comments
 

As a novice, I come seeking wisdom.

I have an old Rockhopper that I'm looking to strip down to the frame and rebuild into a commuter. I've been learning a lot about gearing and all that, and have been researching parts. I see that there are a lot of 1x10 groupsets and a very small number of 2x9, but nothing really with a lower number of gears on the cassette.

To my untrained mind, a 1x10 would introduce more stress and flex on the chain than a 2x5 would, especially while riding on the extremes. And, with a 2x5 setup, you could (probably?) have better ratios - I'm thinking it should be possible to set it up in a way where one chainring is better suited for climbing, and the other for higher speeds.

Yet, I don't see any 2x5 or even 2x7 sets out there. What am I missing?

Another question: would it even be feasible to custom-build my own drivetrain with a 5-gear cassette, to use with 2 rings on the front, and if so, how complicated would it be?

you are viewing a single comment's thread
view the rest of the comments
[–] JayleneSlide@lemmy.world 1 points 2 months ago* (last edited 2 months ago)

Restomod, you say? I have such a nerd-boner for modernizing old school bikes. Tell us more! Can we see a pic?

I was given an 83 Rodriguez last summer, and the last of the parts for that rebuild arrived yesterday. So excited for that build. I just need to figure out which beer goes with the build.