3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
I really don't want to deal with resin, I don't have room for a proper safe workstation for it.
I think ASA with acetone vapour will smooth out too much detail, which is already limited. The layer-lines aren't really an issue either, i print at 0.08mm thickness (it takes forever to print these...)
If you don't have a safe space for resin you don't have a space for printing ASA or vapour smoothing either.
FDM printing ABS/ASA is far easier and safer than resin printing since most CoreXY printers are enclosed these days. A simple fan and ether venting to the outside world or through activated charcoal air filters is a relatively simple procedure. Printers with all of that filtration are easily purchased these days. Even vapor smoothing can be done outdoors if it's warm enough.
ASA i have, because i have en enclosed printer with filter...but i dont have space for handling resin or vapour smoothing (like I said)