this post was submitted on 11 Aug 2025
11 points (100.0% liked)

Electronics

2615 readers
1 users here now

Projects, pictures, industry discussions and news about electronic engineering & component-level electronic circuits.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: No circuit design or repair, tools or component questions.

5: No excessively promoting your own sites, social media, videos etc.

Ask questions in https://discuss.tchncs.de/c/askelectronics

founded 2 years ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
11
op amp performance: what factors affect quality? Example case ua741 (bottom) versus NE5532 (top) audio signals, why is NE5532 better, what specific factors contribute to its superiority? (infosec.pub)
submitted 2 months ago by basketugly@lemmy.world to c/electronics@discuss.tchncs.de
4 comments fedilink hide all child comments
 

I built two circuits as similarly as possible 1) quad ua741 and dual NE5532. FFT on my Rigol scope showing peaks at 1k and 15k as set/expected (2 channels from Seesil generator are mixed with 1k signal at 80% of 15k signal amplitude) with this I believe I created a tool to do AM with my cheap Seesil generator and can also mix two audio signals.

That said, I have no clue what I am doing. I based my testing procedure off an Elenco radio kit.

So I guess I actually have two questions or areas where I am trying to understand better:

  1. What makes one op-amp better than another? I am talking about the IC itself, I believe. Why is NE5532 better than ua741, I see and hear the difference, now why?

  2. What should I be testing and/or what data should I be collecting to better understand and characterized?

Thank you for your time and consideration. I am 100% self-taught savage from the wilderness and stumbled into your camp, but we are not so different, I promise, just had to walk down different road in life. Thanks again.

you are viewing a single comment's thread
view the rest of the comments
[–] basketugly@lemmy.world 5 points 2 months ago

Thank you, yes I specifically saw a breakdown in my sin wave at ~60 kHz on ua741, and NE5532 got to ~650 kHz before I saw distortion. I thought that was awesome. I will study the layouts as you suggested. Any other advice? Does this also explain the noise floor difference or no?