3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
view the rest of the comments
I personally have a Bambu A1, but in hindsight I would not recommend Bambu’s printers, since they are going the Apple route of locking down their ecosystems, blocking things like third-party slicers and accessories. Not very nice of them. My A1 will be perpetually stuck on firmware v4.0.0.0 for this reason as I prefer using OrcaSlicer over Bambu Studio. There is no reason why they should block OrcaSlicer, it’s a fork of Bambu Studio (which itself is a fork of PrusaSlicer, rules for thee not for me?)
The Creality Ender 3 seems to be the most recommended budget beginner printer. I have never owned one myself, but I have used one before in school, and the print quality is great. No idea how difficult it is to maintain though.
If you can stretch your budget a bit, you might also want to look at printers from other brands (Sovol, Qidi, possibly used Prusas, and the new Elegoo Centauri Carbon + non-carbon).
Ender 3 is great for a project printer. You will update it over time and learn all the ways that a printer can have problems. But at least you are able to fix it yourself, and there is a huge online user base who can guide you with issues.
If you want an 95% works, and 5% hobby/tinkering printer for an extremely low budget. It's the only one I recommend
(agreeing that bambu story btw, would not go that route)
FWIW, OrcaSlicer isn’t blocked (except on the H2D, and that may change eventually) on newer firmware, it just has to go through Bambu’s network protocol, same as their own slicer. But OrcaSlicer installs that for you.
(I’m not defending Bambu Lab’s practices here, just want us to be accurate.)