this post was submitted on 03 Oct 2025
73 points (100.0% liked)
homeassistant
16412 readers
139 users here now
Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.
Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation
Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I use severeal of these Zigbee plugs that are announced to manage up to 3600 watts but your comment made me rethink my choices as I use them on washers and my espresso machine… https://de.aliexpress.com/item/1005005734493134.html
Yeah. I buy plenty from Ali but I generally avoid power grid electric devices. Flaws in those are much more likely to result in home fires than some low-power electronic device that doesn't plug into the wall. If you need cheap smart plugs, I'd get something sold locally, certified in your country / EU. IKEA's plugs should be cheap. Either way, every legitimate power plug I've seen either has a disclaimer written somewhere that prohibits inductive load use or it's got a secondary, lower wattage rating for those. Or it says it handles inductive loads at the standard current.
With all that said, if you're educated enough in electricity, you could crack one open and inspect it yourself for safety. It's entirely possible they're using the expensive relays. 😄
E: I tried checking my own homework just now and I can't find Hue or IKEA saying anything about inductive loads on their websites anymore. I feel like I'm going crazy. I swear I've seen it written on IKEA plug and on their website. Maybe the all updated their stuff to use better relays? I don't know. Either way your espresso machine is a resistive load so it doesn't fall in the sparky category.
thank you very much for your reply! They worked fine for 2 years now, I hope they wont fatally fail. In the future I will switch to known brands :)
Out of curiosity, what does failure of one of these things look like? I've got one that's running my window air conditioning unit. It draws about 600 watts while it's running, but when it very first starts up, it pulls about 1700 watts instantaneously and then immediately drops.
That is still within the 15 amps the plug is rated for with a margin of about 100 watts.
As far as I know the switch stops connecting or disconnecting. But besidss that I don't know what the failure mode of a worn relay looks like. E.g. whether it could overheat and melt due to a poor connection because of worn contacts. You should read more on that.
Okay, that's good to know. If it's just that the switch doesn't disconnect or connect, that's fine, because even if it fails in a connected state, the air conditioner itself only pulls about 5 amps while running, and the plug itself is rated for 15 amps.
It only pulls anywhere close to that when it's very first starting up and only for a brief moment.