this post was submitted on 10 Dec 2023
18 points (100.0% liked)

homeassistant

15310 readers
4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
 

From the installation log, I get the follow message:

[supervisor.host.network] Requested to update interface end0 which does not exist or is disabled.

I've tried creating a CONFIG usb drive following the information here. Even with the appropriate wired connection config file I still get the same message.

I don't have a spare keyboard so I wouldn't be able to use the CLI to enable the ethernet. At this point I am not sure how else to approach this problem.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] alwaysconfused@lemmy.ca 1 points 2 years ago (1 children)

I got the information by connecting to http://homeassistant.local:8123/

I get the following screen:

I put the log file here since it comes out as a long run on sentence in lemmy.

I have another SD card with a functioning version of HA OS that's currently controlling my lights and switches. I don't remember how I got the internet working with it but I can still connect to http://homeassistant.local:8123/ as well as directly through the wired IP address so I don't believe the port is damaged. Unfortunately I can't update it because I get an error about no internet connection. I can still add add-ons and such so It's a bit confusing to me.

I only have a laptop computer so I don't actually own a keyboard. I don't know anyone nearby who I could borrow one from either.