homeassistant

17471 readers

3 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Aqara FP2: FW 1.1.9 released! (lemmy.world)

submitted 2 years ago by SteWi@lemmy.world to c/homeassistant@lemmy.world

3 comments fedilink hide all child comments

And it works great!

I started off with 1.1.7 which was terrible (false posivitives/muptiple 'ghosts'), now with 1.1.9 it seems to be fixed.

Now I'm pretty happy with the sensor. Especially creating different detection zones is a phantastic feature. It can even peek a bit in the adjacent rooms to support other motion sensors.

you are viewing a single comment's thread
view the rest of the comments

[–] SteWi@lemmy.world 1 points 2 years ago (1 children)

Seems like my scenario is less challanging...

Have you set the sensibility to high and run the 'empty room' calibration in the app? (Don't know the exact enlish name for the option...).

[–] DeepChill@sh.itjust.works 1 points 2 years ago

I have it set to low at the moment. There are several curtains that move around a tiny bit when the A/C comes on. I haven’t run the empty room calibration yet since the update completed yesterday. I’m going to see if it learns in the background for a day or two before I try that. Let the update “settle in” if you know what I mean.