this post was submitted on 08 Jul 2023
13 points (93.3% liked)

homeassistant

14828 readers
40 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
 

And it works great!

I started off with 1.1.7 which was terrible (false posivitives/muptiple 'ghosts'), now with 1.1.9 it seems to be fixed.

Now I'm pretty happy with the sensor. Especially creating different detection zones is a phantastic feature. It can even peek a bit in the adjacent rooms to support other motion sensors.

you are viewing a single comment's thread
view the rest of the comments
[–] DeepChill@sh.itjust.works 1 points 2 years ago

I have it set to low at the moment. There are several curtains that move around a tiny bit when the A/C comes on. I haven’t run the empty room calibration yet since the update completed yesterday. I’m going to see if it learns in the background for a day or two before I try that. Let the update “settle in” if you know what I mean.