this post was submitted on 08 Sep 2023
307 points (96.4% liked)

Coffee

9174 readers
4 users here now

☕ - The hot beverage that powers the world!

Coffee gadgets - It's always great to learn about new gadgets. Please share your favorite hardware or full setups. It might inspire newcomers to experiment!

Local businesses - Please promote your local businesses. If you are not the owner of the business you are promoting, kindly ask the owner if it's okay. It would be great if the business has a physical store to include an exterior or interior shot.

founded 2 years ago
MODERATORS
 

I swapped out the momentary switch for a standard on/off switch from Amazon for my Eureka Mignon Filtro grinder.

The tiny act of not having to stand there pressing the button in the whole time you are grinding coffee seems petty and ridiculous but genuinely results in a better routine overall. I am now free to focus on other aspects of coffee prep and as a result the routine, even if just for the short time the beans are grinding, is improved

I like multitasking. What can I say.

all 28 comments
sorted by: hot top controversial new old
[–] billwashere@lemmy.world 40 points 2 years ago (1 children)

Probably meant to be a pseudo safety feature but honestly I’d have swapped that button too.

[–] Sh0ckw4ve@lemmy.world 8 points 2 years ago

That's the silly thing when other mignons come with an on off switch

[–] Steak@lemmy.ca 14 points 2 years ago (3 children)

Superglue the button down and plug/unplug lol. The lazy ass method.

[–] Rouxibeau@lemmy.world 4 points 2 years ago

Smart plug > plugging

[–] MystikIncarnate@lemmy.ca 1 points 2 years ago (2 children)

It's lazy by forcing you to find and unplug the outlet (or plug it in).... instead of pressing a button, a categorically easier thing to do.

[–] Eylrid@lemmy.world 1 points 2 years ago (1 children)

Wire the outlet to a wall switch

[–] MystikIncarnate@lemmy.ca 1 points 2 years ago

That seems like what OP did, but with more steps.

[–] Steak@lemmy.ca 1 points 2 years ago* (last edited 2 years ago) (1 children)

Yeah but you're not just pressing the button, you have to hold it down the whole time.

[–] MystikIncarnate@lemmy.ca 1 points 2 years ago (1 children)

You hold it down, by pressing it.

I'm still technically correct :p

[–] Steak@lemmy.ca 2 points 2 years ago
[–] EmoDuck@sh.itjust.works 1 points 2 years ago

Simply stop paying your power company bills whenever you don't want it on. That's way easier and also cheeper

[–] jtmetcalfe@lemmy.sdf.org 8 points 2 years ago

The petty and ridiculous thing seems like expecting someone would want to stand there actively engaging the coffee grinder, pour over coffee is time consuming enough in the busy mornings, much less when I need to grind 170g for cold brew

[–] Brekky@lemmy.world 8 points 2 years ago (3 children)

If you add a smart plug could you activate it remotely?

[–] rDrDr@lemmy.world 5 points 2 years ago (1 children)

My Moccamaster is on a smart plug. Yes, I use 12 hour old beans, but my coffee is ready by the time I go down stairs.

[–] JustEnoughDucks@feddit.nl 4 points 2 years ago

But let's be honest, 12 hours is nothing. The reason pre ground coffee is stale is that it is there for weeks, months, or years pre ground.

[–] Noodle07@lemmy.world 4 points 2 years ago

Synced with you waking up

[–] ImpossibilityBox@lemmy.world 1 points 2 years ago (1 children)

I can't come up with any reason why not for most people. The Wifi in that corner of the kitchen is unbelievable atrocious so I wouldn't trust the smart plug to stay connected reliably.

[–] korewa@reddthat.com 5 points 2 years ago (1 children)

Wow didn’t know that. Mine came with on off but it’s a chrono. Mine also came with the espresso grinders. Is filtro for filtered coffee?

[–] ImpossibilityBox@lemmy.world 1 points 2 years ago

That is my understanding! The lowest grind setting on this is easily fine enough for a moka pot. I do not have any espresso experience to say whether or not it would be passable for an espresso machine.

[–] Strawberry@lemmy.blahaj.zone 3 points 2 years ago (1 children)

My grinder is crank powered, very satisfying

[–] Arxir@lemmy.world 1 points 2 years ago

Nothing will ever make the Flooble Crank obsolete 😌

[–] ElderWendigo@sh.itjust.works 1 points 2 years ago (2 children)

It's likely designed for safety (in a cheap way) so that the thing isn't left on and running for too long. It probably can't properly get rid of the heat it generates fast enough to run continuously. My (higher end, but still made of plastic) burr grinder insists on only running for about 30 seconds at a time because I can't afford an all metal behemoth like at the local coffee shop that can chew through several pounds of beans in one go. The machine needs time to cool between so that it doesn't wear out prematurely.

Also, for devices in homes that have the potential to chew up an entire head of hair or suck in a loose bit of clothing like a tie in an instant, it is good to have their operation tied to a dead man's switch.

[–] darcy@sh.itjust.works 1 points 2 years ago

and supposedly high temps burn the beans

[–] gregw@lemmy.world 0 points 2 years ago (1 children)

This is a home grinder, usually grinding for an espresso last less than 30 seconds, it will have time to cool down, no issue there Many grinders like the Niche have a similar on/off switch.

[–] RGB3x3@lemmy.world 0 points 2 years ago (1 children)

The main thing is definitely safety. Imagine long hair getting caught in it and trying to fiddle with an on/off switch instead of being able to just let go of the button. Or if a child sucks their hand in it.

It could make for a disastrous situation. But if OP doesn't have long hair or children, then they're probably fine.

[–] MNByChoice@midwest.social 0 points 2 years ago (1 children)

Doesn't the grinder have a lid on the bean hopper? That would limit unintentional grinding of non-beans.

[–] ElderWendigo@sh.itjust.works 1 points 2 years ago

Safety, like ogres and onions, is all about layers.