IcedRaktajino

I was an adult during that time, and I don't recall it being anywhere near as annoying. Well, except the TV and radio adverts spelling at you like "...or visit our website at double-you double-you double-you dot Company dot com. Again, that's double-you double-you double-you dot C-O-M-P-A-N-Y dot com."

YMMV, but it didn't get annoying until apps entered the picture and the only way to deal with certain companies was through their app. That, of if they did offer comparable capabilities on their website but kept a persistent banner pushing you toward their app.

The baguette cushioned his fall and the striped shirt scared away any predators. The beret was just a beret, though. Even if you've fallen down a 130ft ravine that's no excuse to look dowdy.

(None of this is true...probably)

My X1 Carbon does now. But it used to drain to empty after a day or two even if it was turned all the way off. Drove me crazy.

The problem ended up being the always-on USB setting in the BIOS. For some reason, even with nothing connected, that would drain the battery until it was completely flat. Once I turned that off, it'll sleep for weeks like you said.

OP, maybe check the BIOS settings for "Always on USB" or similar and disable that?

Mine are metal brackets with tempered glass shelves. So I guess it could be worse lol.

Still, the only reason I have a Samsung fridge at all is because it came with the house.

I would hope so.

Though since it's a Samsung fridge, an expensive, difficult to access control board will break down on its own eventually. Source: Own a Samsung (non-smart) fridge and have replaced an expensive, difficult to access control board despite knowing I should probably just get a different brand.

Yeah, I didn't watch this video b/c I'm at work, but I have seen his ebike video so I'm assuming the construction is similarly well thought out.

It's just that all the fuses and BMSs can't protect against a dodgy cell that decides to self-immolate. For cheap, disposable devices that are only meant to be charged 5-10 times or less and then thrown away, I'm super wary of the batteries that are chosen for those. Have seen too many things burst into flames and even expensive well cared-for devices turn into spicy pillows.

Not that I'd own a smart fridge, but if I did and they started shoving ads on it, it'd look like this later that day:

I predate both of those events by multiple decades lol.

Printers were well established even on the Trash-80 I grew up with. The bloatware drivers aren't really what I'm talking about. I suppose Clippy could be considered prior art to the whole "shoving AI in your face" but at the time I was a WordPerfect fanboy.

"Home Insurance Companies Hate This One Simple Trick"

I learned a long time ago to never install manufacturer printer drivers. Or, at least, never install them from the provided Setup.exe.

They've always installed a bunch of bloatware (HP has always been the worst but other brands are just as bad).

If you look in the setup folder, there's usually the raw drivers you can install from Device Manager. If the driver package is just a single .exe file, you can usually unpack it with 7zip and get at its inner contents.

If that fails, the system-included HP LaserJet 4200 PCL driver is about as close to a universal print driver as you can find lol.

That guy's got some brass ones, lol.

I've upcycled disposable vape batteries for lots of projects, but never anything that draws significant amounts of current. Usually powering ESP8266/ESP32 projects that draw a couple hundred mAh at most.

While I'm all for keeping thing out of the landfill, I would be absolutely terrified to put that many questionable quality lithium batteries into an array let alone try to draw any substantial amperage from them.

Underappreciated top

That was my nickname in college.