TheButtonJustSpins

I just want a place I can dump files to share out for public consumption. Ideally read-only - I'd have a folder shared on my network, and anything I put in that folder would become available through the site.

I realize I could just spin up an nginx container to serve a folder, but I didn't know if there was something out there that would put a pretty interface on it.

Is there a way to enable a media mode while watching something, like to prevent notification sounds/toasts while watching something?

Is there a way to remotely replace the certificate? I can upload it through the web UI, but I'd like to have that process automated.

I just had to reinstall my OS (LMDE6), and I'm having palm rejection issues again. I know I did something when I first got my FW16 to fix this so it wasn't as big a problem, but I don't remember what, since it's been a while. Does anyone have a link to a list of things to do when you first get your FW16 to get it set up correctly?

Is there a tangara community? Have many technical questions and I'm not sure where to ask.

Is there a way to keep Rhythmbox from showing up on the lock screen?

cross-posted from: https://infosec.pub/post/19572448

In LMDE, I installed the .deb so I have the driver. In Manjaro, I'm just using a generic driver. In both cases, I can't select duplex printing.

If I log into the printer's control panel, 1-Sided Printing is Off.

Any ideas would be greatly appreciated.

In LMDE, I installed the .deb so I have the driver. In Manjaro, I'm just using a generic driver. In both cases, I can't select duplex printing.

If I log into the printer's control panel, 1-Sided Printing is Off.

Any ideas would be greatly appreciated.

I've got a Zero set up with usb0 as g_ether and a static IP address:

usb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 10.14.0.15  netmask 255.255.255.0  broadcast 10.14.0.255
        ether 7e:24:7d:cc:68:7c  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

I have the OTG port connected to one of the four USB ports on a 4b. I'm not sure what the next steps are to get the actual connectivity to function, though. I've seen posts saying that gadget mode is only supported on the USB-C port - does that only mean for using the 4b as a peripheral, or does that mean for any connectivity, even if it's the host?

Sept 26 @ https://www.auctionzip.com/Listings/3952589.html

New to CircuitPython, this feels like it should work according to the docs but it prints six Falses. Any ideas?

#!/usr/bin/env python
import board
import digitalio
import time

class body_controller:

  def __init__(self):
    SWDIO = board.D5
    self._reset_pin = digitalio.DigitalInOut(SWDIO)
    print(self._reset_pin.value)
    self._reset_pin.switch_to_output(True)
    print(self._reset_pin.value)

  def turn_on(self):
    print(self._reset_pin.value)
    self._reset_pin.value = False
    print(self._reset_pin.value)
    time.sleep(1)
    print(self._reset_pin.value)
    self._reset_pin.value = True
    print(self._reset_pin.value)

body = body_controller()
time.sleep(1)
body.turn_on()
time.sleep(1)

Is there any way to turn off the random tips like "make a receipts folder!" in the Linux desktop app?