VinS

Biggest round of cuts since... two years go... So it's not exceptional.

Or you buy a kit from a reputable brand

Heat soak should not change what you have here. During the heat soak, machine expands a little. You will get a more usefull Z / mesh when the machine gets to equilibrium.

If you still have problems after that, it's probably a X twisted, see the linked document above. Unfortunately I do not have much time to dig into your configs.

I don't have any experience with beacon. I use Tap or Klicky. With a twisted X, as tap use the nozzle, it should work even with a twisted X

You have a lot of possible options here.

• Your bed is ok, mine is 0.6 variation (sad I know)

1. dish soap with no additives, rinse and dry it correctly before installing it back
2. Verify that it's doing this in the good order :

• Pre-heat bed
• Home XYZ
• Bed leveling
• Re home Z
• Bed Mesh
• Start print

If everything is ok, as someone else said, it's maybe a X twist -> https://docs.vorondesign.com/community/troubleshooting/bryansj/twisted_x_extrusion_diagnostics.html

Checked Cad > NanoCad > 1 year subscription > fail

April's fool probably :/

There's a theft problem in the neighborhood. Postman put the package and lock it after. It's in the front porch as you can see.

3 squeeze squeeze clamp and a little Brad nailer

Well, OTA update may be a bad idea. USB Key is good enough for anything and don't rely to a server. For your radio problem, it would solve it.

That's a multifile split for when we needed to upload them to places where a max upload limit was set. You need to select all and unzip them. Your un zipper should be able to find the pattern and unzip as one. I don't think you will be able to do anything if you unzip one by one

I like it for brainstorming while debbuging, finding funny names, creating stories "where you are the hero" for the kids or things that don't impact if it's hallucinating . I don't trust it for much more unfortunately. I'd like to know your uses cases where it works. It could open my mind on things I haven't done yet.

DAoC is fun, playing on some freeshard (eden actually, started one week ago, good community)

Well I asked some questions yesterday about classes of DAoC game to help me choose a starter class. It totally failed there attributing skills to wrong class. When poking it with this error it said : you are right, class x don't do Mezz, it's the speciality of class Z.

But class Z don't do Mezz either... I wanted to gain some time. Finally I had to do the job myself because I could not trust anything it said.