I'm sure there are some people on here that might have read it, but I haven't met many, so my pick is the Ender's Game saga. There are currently 19 books and I've read at least 10 of them. It's a really easy read, as someone who struggles to get into more complicated writing styles. Some people might be so-so about it due to some of the author's personal beliefs, but I really adore the lore itself. It offers a ton of different flavors to future visions, alien relations, psychology, and humanity.
To add on to the other response you got, what you're experiencing is called warping (corners lifting up). Slow down your first layer, I usually do mine around 20mm/s. And yeah, clean your build plate if you are getting curling and you might've touched the plate. Hand oils transfer easily. You can take off the removable metal sheet and wash it with soapy water. You can also spray or drip rubbing alcohol and wipe with a paper towel between prints. Use a brim and make sure your first layer height is perfect (too far can cause it to not stick well enough, and too close can cause a clog or messy layers). The first layer is the most important for a perfect print.
When you get a new filament, do be sure to check the temperature recommendation on the side of the spool. Sometimes different brands print at different temps. Different types, like PLA and PETG, print at different temps too.
If you got clippers with your printer, they can be used for a lot of things. You can cut stuff off of your prints. Typically what I use mine for is cutting the end of the filament into a point before I insert it into the printer so that it goes in more easily. If you pull used filament out, it will typically be melted and blobby on the end and harder to reinsert.
People will probably give me flak for this but I use the metal wire brush that came with my printer and brush it on the nozzle while it's hot. You can buy extras online. It does wear the nozzle down 'sooner' since it's abrasive, and it makes a bit of a mess, but it's way more effective than trying to wipe it off imo. Cleaning the nozzle isn't super necessary, but it will keep bits of charred filament from getting into your print and will help the nozzle last longer until you change it.
As for the question about putting your printer away, you don't have to do that. I would be more worried about the people sticking their fingers in or near the printer than about the printer itself, lol. 3D printers have really strong frames and motors. They are really easy to take apart and replace things as needed, unlike something like a computer which is a bit more delicate with more electronics. I typically pick mine up by the top bar if I need to carry it anywhere. Just make sure that the printer is somewhere where it won't hit anything if the bed is sliding out, and that as it's homing or moving, the head and the bed aren't going to catch on any wires. Do be careful with the motors if you're ever interacting with the printing while it's moving, they don't care if there's something in the way. :p
Like I said on your last post, I'm happy to help if you have any other questions 👍 I'm happy you've been enjoying your experience so much! 3D printing is the best hobby!
My guess is that it's more social than biological. Women have a tendency to form closer, more emotionally available, and more plentiful relationships with others -- I believe partially due to hormones/brain development and partially due to culture. They've done studies that show that having strong social relationships is important to lower stress and loneliness, which can lead to a longer life. I'm not sure if that's all of it but it definitely couldn't hurt to work on those things :)
Hey sounds great! You've made a good choice. If/when you have any issues pop up that you need a quick solution to, I'll be around :)
So you can get an Ender or similar printer for $100-200 and it would mostly work out of the box, but there is often a huge amount of troubleshooting that follows. I got a 3D printer originally to try to earn extra revenue but never ended up selling anything because the hobby took over for me. I spent hours learning how it works and hundreds replacing parts (trying to perfect my machine, not at all necessary). It's a bit of an investment of time and money but you may find that you end up enjoying it and using it beyond the scope of your current project. It's definitely something that takes a lot of commitment to learn unless you have a lot of money you're willing to invest towards a more no-issue printer like a Prusa.
It looks like there are a ton of makerspaces in Seattle. If you have the time, you can actually often volunteer to use the machines for free. And it would give you the ability to use other machines there, like laser cutters. I actually also volunteer about a couple hours north of you at the bham makerspace. If you happen to be in the area and want help printing stuff -- or you decide to get a printer and you want help learning how to do it, you should hit me up! I'm super passionate about it and I would be happy to give you advice or help out. :)
This is why I chose to go with kobo over kindle. You still have overdrive/libby access, but can also import and organize all of your books via calibre.
God, what year is it..
I love the texture, contrast, and quiet of this photo. The variety of the cobblestones is just so pleasing. I especially love the how you can faintly see the sky in the background. It might not have been intentional but it really makes you feel like you're there.
Speaking as someone that started with little experience, I love Adam Ragusea and Pro Home Cooks. Both explain things you never thought to ask about cooking and concepts that you can apply across lots of different dishes. I've learned things that I still continue to think about long after watching whenever I'm making up some food :)
Sounds like brain fog. Speaking as a fellow sufferer of anxiety (health anxiety included), I know how it is see something that seems wrong with you and try to pin a cause onto it. Are you being social? Keeping up with sleep, food, exercise? I know those are overstated but it sounds like you're having some brain fog. The more you focus in on the fog the more it may seem pronounced, as brain fog is highly influenced by stress. I've suffered from some myself and have felt kind of tuned out for a while. A large part of it for me has been from the shock of different life changes and the endless stress of work and relationships. The fog in that situation doesn't get a chance to subside because the body is trying to get through sustained stress with little damage.
It could also be from imbalances of vitamins like vitamin d or iron. Just to be clear, I highly doubt it was from the burning cable. It's definitely not good for you, but people smoke cigarettes and breathe road fumes for decades without losing the mental capacity you're describing here. Funky stuff happens when we look back on our past selves too, I feel like it's hard to make a fair comparison to yourself at any prior point when you factor in a lot of things that happen in-between. I don't doubt what you've been experiencing though. Sounds crappy. I hope you give yourself a chance to consider all of the possibilities and be easier on yourself for not functioning at 100% right now -- it doesn't mean it's forever or that it means something big, it could just be your capacity right now.
Don't know about NewPipe, but SponsorBlock is integrated into revanced!