hibbfd

typically the fan cooling the heatbreak and extruder stays on even with the "extruder" aka part cooler fan turned off

don't get me wrong, getting a printer this big to run at those speeds must be quite a feat of precise engineering and craftsmanship. but in my opinion this machine is no more than a novelty; a machine no more capable than an off-the-shelf ender 3.

can you imagine producing a prototype from this machine? I have half a notion to build a profile for it in my slicer just to see how long I'd be waiting for a part 1m in any dimension.

is it cool? without a doubt. but FDM at this scale using 0.4mm to 1.0mm nozzles and 1.75mm filament is pointless. I think they missed the beat here by not engineering a hot end with greater extrusion capabilities. if it were fitted with, say, a 2mm nozzle it would be much more capable of producing large parts in a reasonable time frame.

curious machine. I'm surprised to see such mediocre specs with that price tag.

claims to be industrial yet uses 1.75mm hot end and can't print any industrial grade materials

this project is awesome. thanks for sharing. now I want a v3

I ran a couple temp towers with the overture petg and I found 270-275c nozzle/80c bed had the most desirable results. 0.6 nozzle 0.4 layer height. also with the sprite pro.

I printed a couple pretty pieces before I started to get burnt crusty bits showing up in my prints so take this with a grain of salt. maybe due to me changing layer height to 0.14 without further testing.

LOL

the caveat is that it had to once cost money? so stuff that has always been free is no longer available?

I'm having a bad, bad, day

It's about time that I get my way

Streaming whatever I see

oh, indescribable me

I’m having a bad, bad, day

If you block my ad blocker that's not okay

Watch, this is so fun to see

oh, indescribable me

ℋ𝑜𝓂𝑒 𝒾𝓈 𝓌𝒽𝑒𝓇𝑒 𝓉𝒽𝑒 𝓉𝑒𝓇𝓂𝒾𝓃𝒶𝓁 𝒾𝓈

the only way to keep it clean is to remove one or two objects a day

source: my desk is a clusterfuck

good to know. I used the image button on the kbin post dialog.

https://ibb.co/XX7cwnV

https://ibb.co/9YK2YWt

kbin

also weight gain. I worked 6pm-6am for almost 2 years straight and gained 40lbs without changing my eating habits.

started drinking every morning after work too. and days (nights) off were a total clusterfuck. wake up, hit the grocery store before they close, start drinking because wtf else am I gonna do at 11pm alone in my camper with no wifi and spotty cell signal. my experience is probably not the norm lol