nottelling

joined 2 years ago
[–] nottelling@lemmy.world 15 points 4 weeks ago* (last edited 4 weeks ago) (2 children)

Devops will have more job openings, network will have a higher salary, especially as you become more senior.

Devops people who don't know networking and/or general traditional sysadmin work are a crushing pain in the ass for those of us who have to support them though. Networking background will make you better at devops, but not necessarily vice versa.

[–] nottelling@lemmy.world 1 points 2 months ago (2 children)

no. Arp bridges layer 1 and 2. It's switch local. With a VLAN, it becomes VLAN local, in the sense that 802.1q creates a "virtual" switch.

[–] nottelling@lemmy.world 1 points 2 months ago

Broadcast traffic (such as DHCP) doesn't cross subnets without a router configured to forward it. It's one of the reasons subnets exist.

[–] nottelling@lemmy.world 2 points 2 months ago (1 children)

What in the world is "a proprietary OS I cannot trust". What's your actual threat model? Have you actually run any risk analyses or code audits against these OSes vs. (i assume) Linux to know for sure that you can trust any give FOSS OS? You do realize there's still an OS on your dumb switch, right?

This is a silly reason to not learn to manage your networking hardware.

[–] nottelling@lemmy.world 1 points 2 months ago* (last edited 2 months ago) (1 children)

A VLAN is (theoretically) equivalent to a physically separated layer 2 domain. The only way for machines to communicate between vlans is via a gateway interface.

If you don't trust the operating system, then you don't trust that it won't change it's IP/subnet to just hop onto the other network. Or even send packets with the other network's header and spoof packets onto the other subnets.

It's trivially easy to malform broadcast traffic and hop subnets, or to use various arp table attacks to trick the switching device. If you need to segregate traffic, you need a VLAN.

Edit: Should probably note that simply VLAN tagging from the endpoints on a trunk port isn't any better than subnetting, since an untrusted machine can just tag packets however it wants. You need to use an 802.1q aware switch and gateway to use VLANs effectively.

[–] nottelling@lemmy.world 4 points 2 months ago (10 children)

What you are asking will work. That's the whole point of subnets. No you don't need a VLAN to segregate traffic. It can be helpful for things like broadcast control.

However, you used the word "trust" which means that this is a security concern. If you are subnetting because of trust, then yes you absolutely do need to use VLANs.

[–] nottelling@lemmy.world 3 points 8 months ago

1.20.1992:

In a 2012 Tumblr post, comedian Donovan Strain used the song's lyrics to determine that the titular "Good Day" likely occurred on January 20, 1992.[10] Strain wrote that this date was "the only day where Yo! MTV Raps was on air, it was a clear and smogless day in Los Angeles, beepers or pagers were commercially sold, Lakers beat the SuperSonics, and Ice Cube had no filming commitments".

[–] nottelling@lemmy.world 43 points 8 months ago (4 children)

Yup, was a Garmin. Part of me has been a little worried cause i can't find my way anywhere without GPS anymore, and Google has been getting shittier every day.

Hell, I remember the first time I used maps on a computer to plan and print a route, and the first time I could do it online with MapQuest.

Those were moments that the Internet really felt like the future.

3
(lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by nottelling@lemmy.world to c/scuba@lemmy.world
 

--

 

Edit: ideally wifi cameras that I can solar power.

Looking to replace my Arlo cameras with something self-hostable. Arlo lets you store on a USB stick, but there's no way to get out from under their cloud, which gets more expensive all the time.

10
submitted 2 years ago* (last edited 2 years ago) by nottelling@lemmy.world to c/scuba@lemmy.world
 

Pretty new diver here, about 40 dives, and looking for advice.

Just finished up a week of dives in Grenada, and made a point of paying attention to air consumption. Based on Internet advice, I focused on breathing deeply and exhaling completely, counting 4 seconds in, 6 seconds out. Doing this, my computer reported average SAC has dropped from about 0.8 to 0.5, and I'm not the one calling dives for gas anymore. This seems like a great improvement.

However, my buoyancy goes to shit when I'm doing this. Breathing more "normally", I can maintain a neutral depth with good trim. But with this more efficient breath control, I go up and down several feet with every breath. This actually makes it pretty easy to control when I ascend and descend, but obviously isn't great for most of the dive.

If I try to breathe normally-but-slow, I feel like I'm hyperventilating.

So what's the trick here? How do you both breathe efficiently and control your buoyancy?

I think I'm pretty well weighted, since I have no problem maintaining my safety stop with the shallower breaths.

view more: next ›