this post was submitted on 04 Feb 2024
276 points (96.6% liked)

hmmm

6424 readers
1 users here now

For things that are "hmmm".

Rule 1: All post titles except for meta posts should be just plain "hmmm" and nothing else, no emotes, no capitalisation, no extending it to "hmmmm" etc.

founded 2 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] Hiro8811@lemmy.world -5 points 2 years ago (5 children)

I don't think so. Water would fill the room and push equal force on the whole door.

[–] piecat@lemmy.world 27 points 2 years ago

Even if true, there's not equal support around the door.

The bottom of the door isn't braced on the bottom, but the top and edges are.

The left side is supported on multiple hinges that are solid, and keep the edge a fixed distance from the frame. The right and top edges are supported by relatively thin metal that only provide bracing in one direction.

  1. the door bowed from the pressure and the bottom right corner fails first.

  2. once the corner was out there's more leverage for twisting the door.

  3. the top right corner is stuck, diagonal crease appears as the door tries to "twist", this wedges the corner more into the frame.

[–] CrayonRosary@lemmy.world 7 points 2 years ago* (last edited 2 years ago) (1 children)

Well, it was a flood, so what now?

[–] Ross_audio@lemmy.world 4 points 2 years ago

Let them assume a perfect sphere, no friction, and no air resistance.

Then they'll be right!

[–] zaphod@feddit.de 4 points 2 years ago

No, it would only flood to a certain level at which the door would be forced open, so not an equal force on the whole door.

[–] imgcat@lemmy.ml 1 points 1 year ago