Thank you, USB-C (and the EU too).
Well, some stuff still has dedicated adapters, but hopefully those phase out sooner or later.
this post was submitted on 12 Nov 2023
1232 points (98.7% liked)
Humor
8478 readers
1 users here now
"Laugh-a-Palooza: Unleash Your Inner Chuckle!"
Rules
Read Full Rules Here!
Rule 1: Keep it light-hearted. This community is dedicated to humor and laughter, so let’s keep the tone light and positive.
Rule 2: Respectful Engagement. Keep it civil!
Rule 3: No spamming!
Rule 4: No explicit or NSFW content.
Rule 5: Stay on topic. Keep your posts relevant to humor-related topics.
Rule 6: Moderators Discretion. The moderators retain the right to remove any content, ban users/bots if deemed necessary.
Please report any violation of rules!
Warning: Strict compliance with all the rules is imperative. Failure to read and adhere to them will not be tolerated. Violations may result in immediate removal of your content and a permanent ban from the community.
We retain the discretion to modify the rules as we deem necessary.
founded 2 years ago
MODERATORS
Just because they'll be able to physically connect and give a non zero amount of power, doesn't mean they won't be obsolete.
load more comments
(1 replies)
As USB gets upgrades to provide more power, we will need those barrel jacks less and less. My laptop can only charge 65W from USB C, but 130W from the barrel jack. It's a couple of years old now, I think from before there was a standard for USB to provide over 100W, but USB C can provide 240W now. So new laptops shouldn't even need barrel jacks anymore.
load more comments
(9 replies)
load more comments
(1 replies)
Whoa dad is that a vintage 1970s 6.3VDC 400mA?
Yes, yes it is, son.
That's nothing I have an adapter kit that allows you to charge any type of. All of the big name brands like, Nokia, and Motorola.
It's a wild collection of 16 pins and barrel jacks and split connectors or if you want to go super futuristic mini USB B. I can charge any phone I want provided the phone I want to charge was manufactured before about 1995.
And no more radio shack to buy more of these!
I really don't know where to go any longer for some things like this. I know, interwebs has it but I usually have questions that scamazon won't answer.
Mouser or Digikey are your friends here.
You pay a little more than the cheap stuff on Amazon but you can be sure you're getting the exact specs you ordered.
Mouser really is to me a neat lil store. You get in, ask the guy in the counter for the exact stuff you want, they type one or two things in a computer, check if that’s actually what you want and in less than 5 minutes they fetch it
That's not how websites work
If it's important... Double check the output with a meter just to be sure. Only got burned by it once, but for expensive/complex circuits, just give the critical components a sanity check.
My dad has been an electrical engineer since the early 70's. My inheritance in this regard is staggering.
The ferrite is strong with this one.
Last month, the power adapter to my router died out of nowhere. I wasted a ton of time troubleshooting literally everything else other than the power adapter because I've never had one die before the actual device itself.
Of course none of the other adapters I had on hand fit. I had to order a new one...
I've had that situation a few times.
Just cut off the end and soldered it to another power adapter of appropriate voltage/amperage/pinning (be especially watchful in case one is centerpin positive and the others centerpin negative)
A lot of those work for other products. It's still good, don't throw it away.
load more comments
(2 replies)
Having some spare AC adapters with barrel connectors is a pretty handy thing to have around if you do any electronics work
12v 900ma…. Hmm… let me check my box of assorted plugs
A good thing to keep in mind is that you should match voltages, but with amps the cord just has to be equal or higher than the device. It's a rating of what the cord can provide, not what it's spitting out at all times like voltage.
So in your example of 12v 900ma, a 12v cord thats 1a or greater should work fine assuming the barrel is the same. This can also help declutter anyone's 'collections'...if you have a whole mess of 12v cords, you can safely ditch the lower amp ones.
Ah, negative tip!
Virgin inifficent ac-to-dc converter user vs chad pure DC system user
I love that pretty much everything short of heavy appliances you can think of comes in 12v 10a max cigarette plug or USB now. USBC PD -to -dc plug adapter is fuck in awesome
Micro USB cables are just as bad. They seem to multiply on their own.
Def the tribbles of the cable world.
I have a drawer full of these as well. But they wont move to the next apartment once I move.
You will need one within a week of getting rid of them and it will cost you $60-$80 dollars. It doesn't matter if you've had them for a month or 10 years without needing one, as soon as you get rid of them, you'll need them.
Thrift store. There are always dozens there.
That's what you say now.
I think I have a big box of them somewhere. They have come in handy from time to time.
An effects pedal collector's dream, really.
The other day I noticed a device with an adapter that had wildly different amps and voltage but the Watts were the same and it fit so...
I think it goes there...
That is going to result either in a bang or nothing happening.
You can use a power supply if:
-
the plug fits
-
the polarity is correct ( - and + are at the correct location)
-
the voltage matches
-
the current and wattage is the same or higher
#4 is subtle. It might work with less current, but this is a caveat not appropriate for novices.
#3 is also sometimes not a problem, many devices work with a bit lower or higher voltage. It's because the DC to DC converter that is used to control the voltage for the device itself is tolerant enough.
Sometimes devices are multiple volts tolerant with the caviate that the components get warmer with higher input voltage and therefore the device could have reduced life expectency. If the devices where not tolerant especially for lower voltages a slightly bad cable or a long cable could drop the voltage enough so the device wouldn't function.
You want to make sure the Voltage matches or bad things can happen. The current and Wattage can be the same or higher, it will only draw as much as it needs.
I literally inherited a massive collection of these when my ex died because his family didn't want to deal with them. I tried to save one of each plug type but I couldn't store 50 lbs of adapters forever
When I was a kid my dad would spend hours in the surplus electronics shop avoiding my demon of a mother. I used to untangle and wind up these things just for something to do. They had like oil drums (but cardboard) full of them, all tied in huge knots.
I'm not the only one then
Internal monologue: well I haven't used a parallel cable since '93, I should probably toss this out.
remembers that one time I couldn't find this cable and it screwed me turning in an assignment
sky darkens, eyes become shadowed, teeth become exaggerated, skin goes pallid
Internal monologue: but after all, it's mine. Why shouldn't I keep it? Why shouldn't I keep the precious.
view more: next ›