CaptainFlintlockFinn

Any time!

If it didn’t print at all I’d be looking at that USB right away. I had many half printed things and corrupted files before I clued in.

I started resin printing a couple months ago. I had some of those layer problems too. I found that I need way more supports than I thought I needed at the beginning. This is a pretty good guide on supoorts. Alternately Ive been using lychee slicer’s auto supports. They seem to work well for the most part.

I also just recently did some exposure tests. It takes a while because each test is about 20 minutes but it turns out I was under exposing my prints so things are better now.

Lastly I replaced the usb stick the printer came with. I highly recommend doing this right away, a bad stick can do weird things. I got two 64gb Kingston data travellers for $10 Canadian. It’s well worth it.

Haven’t had the layer issues since I did these things and, fingers crossed, I haven't had a failed print since either.

There’s an extra leg in that first one right? It’s messing with my head.

Lucky for me I can’t afford a new car anyway. I’ll just keep driving my unconnected car.

Isn’t apple shifting to production in Inda?

How do you go about getting an invite to one of these holy grails?

“Percentage grades make it possible to differentiate between good work and excellent work more precisely than vague descriptors such as ‘emerging’ and ‘developing,”

This is a dumb take. No one in grade k-9 needs more specificity than the four labels coupled with teacher input. I suspect the people who are against this change are simply against change.

BC has an NDP premier.

I’m a parent too and I agree with you for the most part. I’m woefully under qualified for this job and I’m very grateful for the professionals and other adults in my youth’s lives. We’re very much missing the ‘village’ part of raising kids.

I guess not. I just went to their site out of curiosity. I couldn’t find any policy statements. Just a vague mission statement type thing.

Update: they have a policy document from 2021 under their ‘governing documents’ heading on the website. The document doesn’t address this issue at all.

Reducing the time won’t help with adhesion to the build plate but an overexposed layer might make the following layer less likely to adhere correctly. I always do 25sec on my bottom layers and never have adhesion problems so I figured it could work for you too.

I’m not 100% sure because I’m fairly new as well but I’d try going with 25 seconds for the bottom layers and adding a bit of wait time before lifting.

It looks like your bottom layers did fine but maybe the normal layers didn’t adhere properly to the bottom layers. That could explain why you had some sticking to the FEP.

I’d also make sure the FEP sheet is is good shape. No big scratches or dents.