infinitevalence

joined 2 years ago
MODERATOR OF
[–] infinitevalence@discuss.online 6 points 12 hours ago

6:30am during the school year 8ish in summers if I can.

[–] infinitevalence@discuss.online 1 points 6 days ago (2 children)

i like glue and VHB tape.

I spend as much on maintenance for my Honda Clarity as I do on my Odyssey. I just want to be able to skip the gas station unless im doing a road trip, and I want regen breaking so I dont burn through pads and rotors all the time.

[–] infinitevalence@discuss.online 2 points 1 week ago (2 children)

You dont drive a minivan. I swap rotors more often than pads, because its a beast to slow down. Regen would actually really help reduce break ware for me.

[–] infinitevalence@discuss.online 14 points 1 week ago (13 children)

Wtf am I supposed to replace my aging Odyssey with then. It's perfect for PHEV most days it never goes more than a few miles and when I really drive it were don't hundreds to thousands of miles.

I don't like the Sienna, the pacifica is trash, the ID Buzz is a maybe but does not seem as practical, and KIAs still catch fire to often for me to trust.

Both fail to capture his small stature.

[–] infinitevalence@discuss.online 1 points 1 week ago (2 children)

Melatonin, a calendar reminder, and lights on an automatic timer. It's not perfect but it sends a visual cue, and audio cue to take a pill. Set it for about 30min before you want your bedtime.

[–] infinitevalence@discuss.online 50 points 1 week ago (1 children)

This time if they pull a bit more to the right I'm sure moderate Republicans will vote for her.

/s

I would love this!

I'm sorry for you're experience and I hope you know that is OK to feel this way and to feel conflicted. Talking about it is a great first step and there are professionals who ate there if you want to unpack this in a safe and supportive setting.

[–] infinitevalence@discuss.online 25 points 2 weeks ago

Actually funny he should do it.

Probably 20 years ago

 

Co-workers Ripjaws keyboard died and since its not hotswap it cant be fixed easy.

https://c1.neweggimages.com/ProductImageCompressAll1280/23-828-011-V04.jpg

He is looking for a replacement but is really addicted to the macro keys on the left. Anyone have a non Keychron rec? (I am already sending him all the Keychron keebs that offer similar layouts)

Thanks/Cheers!

 

Despite the massive breach where we found out that notes (where lots of people stored previous passwords) were not stored encrypted by Lastpass, I have stuck with them for years because its hard to switch services.

Recently I realized that both my wife and I were paying for 2 separate password manager services and we need to consolidate down to one.

Staying with LastPass and moving to a family account would only cost $4/m which is still 1/2 what we were paying combined.

Is there another manager that offers Apple, Android, and Browser based applications/plugins? Ideally also with an authentication app, though I can swap to any authentication if I need to so its just a nice to have.

 

I will never be done tweaking and adjusting things, but for now, this is how I want it.

I do wish I had more control over things like Discord and Steam. Some of the colors and things just dont fit well with the rest of the style but o well, cant make everything perfect.

 

https://www.printables.com/model/759734-oreck-vacuum-tube-extension#preview

Replacement tubes are only about $15 but why spend that when I can just print them!

 

Hey there fellow neck-beards and grey-beards!

I have a motherboard with USB3.1 and I need to down clock it so its always 5 Gbit/s and never faster.

Is there any way to do this, my DuckDuckGo Fu is not finding the right combination of words.

I use Arch BTW...

Just kidding im still running Manjaro.

Thanks.

 

Starting small:

  1. Finish RFP/Quote
  2. Call Retirement company
  3. Write yearly review follow up email

What do you want to get done today? Set a goal, maybe start small. Lets try to find ways to support each other.

 

Current Construction Projects:

  1. Finish Drywall/sand/paint and install trim to office Door
  2. Kids tree-house base/floor
  3. Main bedroom bath exhaust fan install
  4. Kitchen Range exhaust fan/vent install
  5. Build out fire walls for server room
  6. Finish Fiber pull to server rack and Terminate *new since now I remember I still need to do this too

Current hardware projects:

  1. Kids custom 3d printed TLK keyboards
  2. Micro cluster rack mount design
  3. Micro cluster storage solution
  4. De-com old server, ship to Xydros
  5. Move racks to server room
  6. Rebuild rack layout
  7. Add UPS to wireless/nvr/camera equipment

Software Projects:

  1. OPNsense/PFsense update
  2. Pihole for DNS
  3. Degoogle storage
  4. Degoogle photos
  5. Degoogle calendar
  6. 3-2-1 bakup solution
 

For a while now I have been a Brother evangelist because they just worked, they did not lock you into first party only printing supplies, and they were overall a good value.

THEN: my printer firmware auto updated and suddenly my toner cartridges were no longer recognized. Its not that they ran out and I put in new ones, simply the ones that had previously worked (3rd party already) just stopped and it reported an error.

I managed to find a guide on downgrading the firmware, and now I am back up and running and auto update is turned off. I am also saving all the little chips from the Brother branded cartridges.

So Dear Brother Printers, Please choke on a bag of dicks. I spent $500ish on a laser color printer so I would not have to deal with the shitification that has happened to inkjet. Seeing hostile and profiteering consumer behavior from other printer companies you decided to copy them for short term gains.

Well I will no longer recommend your products, and I will go out of my way to fix and downgrade your older printers with the sole purposes of putting them back into use and costing you new sales.

1 down, 1 in the cue, feel free to stop being anti consumer and breaking hardware we already paid for.

URL referencing the last time I know they got caught messing with Firmwares: https://www.therecycler.com/posts/new-firmware-updates-affect-aftermarket-cartridges/

 

Hey y'all. I'm not a huge fan of defederating other instances but I honestly don't know that hexbear is adding any value to our discussions. So far everything I have seen is trying to be edgy and gatekeeping with manipulative language. They also seem to enjoy stirring things up for entertainment.

So I pose the question is it worth it to stay federated to a seemingly bad faith instance for the few people who might understand and enjoy the lulz.

I would vote no but I'm open to the discussion.

 

Hey folks... Yes we all saw the drama, and yes Linus probably did not understand that the criticism was of their pace and methodology rather than on a single video.

BUT please down vote bad content, not because your mad at Linus, and more importantly if you are down-voting to protest, do it on Youtube!

This unofficial community (of like 3 people) is not affiliated, we are not beholden, we are fully independent and have no connection to LTT. Down voting here without adding to the discussion is as bad as posting YouTube video's without fixing the errors.

 

My 7 Year Old decided that their GMMK needed a key cap refresh, so we sat down pulled off all the old caps, and put on new ones out of my spare/surplus.

The old Keycaps:

 

The only real complaint I have had for my Keychron K4 has been the plastic case, so yesterday I decided NO MORE!

I took some aluminim stock plate I had left over from another unrelated project and trimmed it down, tapped and countersunk mounting holes, and give it a hand brushed look with some 80 grit sand paper.

So far it feels solid, and I love the diffuse reflections from the key illumination. Combining the open sandwich plate with low profile caps gives it a really cool "exploded" or raw look.

I also added some silicone rubber to some of the larger keys to tone the "ping" down and give them a heftier feel and sound.

I dont love the stock stabilizers that come with this board so they may be the next update. Switches and Firmware are already all custom.

view more: next ›