voracread

Bought a 5700X recently and was surprised to find that it came with no cooler! Luckily I had not shattered my old Ryzen 2200G cooler, so for the time being it is working. But this would have been a bad experience otherwise.

Even now I am not very happy.

I have an Acer monitor with in built speakers connected through HDMI cable to RX7600 GPU. Previously when I was on Ryzen 2200G CPU I could get sound from the monitors in built speakers. But now after the upgrade the Windows 10 says that it is sending sound to High Definition Audio Device but I am not getting any sound.

Any idea about why there is no sound now?

Before update on tapping a collapsed comment it would first collapse first into a single line and on second tap it would open to show child comments. (This itself is probably inconvenient and I feel it would be better if we go directly to expand on single tap)

Now I have to exclusively click on the small arrow to do that. Just tapping on the comment itself does not do anything.

Can we have two arrows, one for collapse and one for expand?

Let us assume there are 4 slots for RAM in a given motherboard A, B, C and D. Slot A and C form a dual-channel and B and D form another dual channel. (They are of same colour physically.)

Now I have 2 similar RAM sticks of 3000 MHz running in dual channel. I am buying 2 similar RAM sticks of 3200 MHz (only available option for me now)

What would be the best configuration to get most speed in games from these?

p - 2 sticks of 8 GB (3000 MHz)

q - 2 sticks of 16 GB in proper dual channel configuration

r - 2 sticks of 8 GB (3000 MHz) and 2 sticks of 16 GB (3200 MHz) inserted in the 2 dual channel configurations respectively.

I have no idea of the marking in the airport runway, taxiway etc. Where do I learn about reading the numbers and signs on the tarmac?

I am trying the tutorials. Stuck with taxiing one which keeps repeating that I should release brakes and move even when I am faltering around. Also keeps saying I am going in circles when I am just following the road straight ahead of me.

Trying to see if I can post in this community. Need help with Flightgear.

Any simple (preferably open source) app to convert a few images into a looping GIF?

I have a ddsktop with Windows and Fedora and few other Linux distros already installed. I have a spare partition for the OS itself but have to share /home with the Fedora install.

How do I do this safely without formatting /home?

I have an AM4 based desktop with the following current configuration:

• Ryzen 2200G CPU
• 8 x 2 DDR4 3000 MHz RAM
• RX 7600 GPU
• Gigabyte B450M D3SH motherboard
• Corsair RM550 PSU
• 1 GB M2 NVME disk
• 2 HDDs - 1 mirroring the NVME and the other as data drive
• Acer FullHD flat panel with FreeSync

Goals are casual gaming at 1080p or slightly lower resolution, target fps 30+

Please give me suggestions for:

1. Best AM4 CPU available now (a) with no integrated graphics (b) with integrated graphics.
2. How would you rate Ryzen 5700G for this setup? It is available and budget friendly.
3. Can I buy 3200 MHz RAM to fill the 2 vacant RAM slots in my motherboard so that I can continue to get dual channel benefit? 3000 MHz RAM seems to be no longer available from the brand/locally.
4. 1 GB SATA SSD for cheap purely to store game installations (Crucial BX) but there is no spare SATA port in the motherboard, is there a way to connect 2 HDDs to same SATA port?

EDIT 1: I think there are 3 HDDs and 1 DVD drive occupying all 4 motherboard SATA ports. I erred in the post above earlier.

While scrolling All it does not happen. It happens if I open any post or go into any community.

Is there a setting to prevent this?

I have come across this interesting system settings module on Pling store. Is there a way to install it from within system settings like we can a theme, icons, widgets etc.? Or is it necessary to configure the package manager as suggested on the site?

https://www.pling.com/p/2229130

I have downloaded the tar.gz file hoping for a direct way to install it.

identity.kde is supposed to be used across KDE websites based on my understanding. But I am not able to login using my ID from identity.kde.

Does anyone know why or should I create a new account there?