anguo

joined 2 years ago
[–] anguo@lemmy.ca 2 points 1 hour ago (1 children)

I consider my internet connection to be good, and I'm at 60mbps down, 10 up.

[–] anguo@lemmy.ca 14 points 2 days ago (2 children)

I mean, from what I see from your pictures, these models clearly need supports, at least in the orientation you're printing them at.

[–] anguo@lemmy.ca 2 points 5 days ago

I don't want to defend the cybertruck, but on a Prius Prime you'd also be completely stuck if you didn't disable the traction control.

[–] anguo@lemmy.ca 47 points 5 days ago (2 children)

Honestly, I've felt like that since the first time I went to the US as an adult back in 2007. When flying between Canada and Europe or East Asia, I've also actively avoided having connection flights through the states, even when it would save me hundreds of dollars.

I've never met anyone as condescending and threatening as a US border agent.

[–] anguo@lemmy.ca 5 points 6 days ago (2 children)

Why are B citizens treated better than A citizens?

[–] anguo@lemmy.ca 8 points 1 week ago

You can add more images in the post content.

[–] anguo@lemmy.ca 2 points 1 week ago

Title seems unrelated to video.

[–] anguo@lemmy.ca 5 points 1 week ago (1 children)

I'm aware of that, but it sounds even more distracting.

[–] anguo@lemmy.ca 9 points 1 week ago (5 children)

If anything, that's just distracting from the game on the screen.

[–] anguo@lemmy.ca 2 points 1 week ago

I was just about to comment that the last time I did it, it was because I had some lightscribe disks that I wanted to try, but already had no use for anything on a CD.

[–] anguo@lemmy.ca 2 points 2 weeks ago (1 children)

AFAIK, it's mostly the lack of a fan in the MacBook Air that will throttle performance. It should still be decent though.

From what I see online however, Rogue Trader just has(had?) bad performance on macs in general.

 

I believe this was caused by the horrendous layer adhesion of this silk PLA. Didn't have time to tune the filament, and based it off of another silk one.

 

This is clearly just AI slop, but I had to share it with someone.

 

The bowden tube between the extruder and hotend somehow got unscrewed, and the extruder just kept unspooling filament around the room, as the printer kept happily going on.

Here's a photo from farther out: 1000010130

 

I upgraded two Prusa MK3s to MK3.9, and ended up with a couple of spare boards, stepper motors and a bunch of other things. So I decided to turn them into a Makelangelo clone!

Since the school I work at had these large standing whiteboards, I designed and printed corner brackets to hold the motors, as well as a base for the electronics.

1000006226

I'm still having trouble with the homing process, but very happy with the results so far!

I'll be posting the firmware and 3d printed files online soon.

 

10000053041000005305

 

J'avais pris cette photo en avril, je me suis dit que ça pourrait faire sourire quelqu'un.

view more: next ›